E6486 User Manual

The QT60486 / QT60326 acquisition bursts CAN be synchronized to an external source of repetitive electrical noise, such as 50Hz or 60Hz using the Noise Sync feature, which is enabled via Setups. External repetitive signals are thereby heavily suppressed, since the system and the noise become synchronized and no longer beat or alias with respect to each other. The sync input triggers the burst for key 0 (X0Y0); the device waits for the sync signal for up to 100 ms after the end of a preceding full matrix scan (after key #47), then, when a sync pulse is received, the matrix is scanned in its entirety one time. If no sync pulse is received in 100ms, the part wakes on its own and re-scans the matrix one time then goes back to sleep. Sync pulses should be spaced no more than 99ms apart to prevent this from happening. By Quantum Research Group
E6486 's PackagesE6486 's pdf datasheet



E6486 Pinout will be updated soon..., now you can download the pdf datasheet to check the pinouts !
E6486 Application circuits
E6486 circuits
This is one application circuit of E6486,If you need more circuits,please download E6486's pdf datasheet.


Related Electronics Part Number

Related Keywords:

E6486 Pb-Free E6486 Cross Reference E6486 Schematic E6486 Distributor
E6486 Application Notes E6486 RoHS E6486 Circuits E6486 footprint
Hot categories