125mhz Single Supply, Clamping Op Amp Corporation

The EL2257 is a single supply op amp Prior single supply op amps have generally been limited to bandwidths and slew rates one-fourth of that of the EL2257. The 125MHz bandwidth, 275V/s slew rate and 0.05%/0.05 differential gain/differential phase makes this part ideal for single or dual supply Video speed applications. With its voltage feedback architecture, this Amplifier CAN accept reactive feedback networks, allowing them to be used in Analog filtering applications. The inputs CAN sense signals below the bottom supply rail and as high as 1.2V below the top rail. Connecting the load resistor to ground and operating from a single supply, the outputs swing completely to ground without saturating. The outputs CAN also drive to within 1.2V of the top rail. The EL2257 will output 100mA and will operate with single supply voltages as low as 2.7V, making them ideal for portable, low power applications. The EL2257 has a high speed disable feature. Applying a low Logic level to all ENABLE pins reduces the supply current to 0A within 50ns. Each Amplifier has its own ENABLE pin. This is useful for both multiplexing and reducing power consumption. The EL2257 also has an output voltage clamp feature. This clamp is a fast recovery (< 7ns) output clamp that prevents the output voltage from going above the preset clamp voltage. This feature is desirable for A/D applications, as A/D converters CAN require long times to recover if overdriven. By Intersil Corporation
EL2257 's PackagesEL2257 's pdf datasheet

EL2257 Pinout, Pinouts
EL2257 pinout,Pin out
This is one package pinout of EL2257,If you need more pinouts please download EL2257's pdf datasheet.

EL2257 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

EL2257 Pb-Free EL2257 Cross Reference EL2257 Schematic EL2257 Distributor
EL2257 Application Notes EL2257 RoHS EL2257 Circuits EL2257 footprint