6-channel Clock Driver

The EL5001 is a 6-channel level shifting driver designed primarily for use as a Clock Driver in LTPS LCD Displays The EL5001 Buffers and level shifts six Logic level input signals. The six channels are grouped in to two sets, one of two channels and one of four channels. Each set CAN be configured in the inverting or non-inverting modes. Operating from 3.3V input Logic the output swing is set using two reference input pins. These pins CAN be up to 18V differential and are not buffered, so should therefore be bypassed effectively. The EL5001 is designed to drive capacitive loads of 500pF with rise and fall times of just 20ns. A three-state pin is provided to set all outputs in to a high impedance mode. The ENABLE pin CAN be used to put the device in to a power save mode where the power consumption drops to just 3A. The EL5001 is available in 20-pin QFN (4mm x 4mm) and HTSSOP packages. Both are specified for operation over the -40C to +85C temperature range. By Intersil Corporation
Part Manufacturer Description Datasheet Samples
EL5001IREZ Intersil Corporation 6-Channel Clock Driver; TSSOP20; Temp Range: -40° to 85°C
EL5001IREZ-T13 Intersil Corporation 6-Channel Clock Driver; TSSOP20; Temp Range: -40° to 85°C
EL5001IREZ-T7 Intersil Corporation 6-Channel Clock Driver; TSSOP20; Temp Range: -40° to 85°C
EL5001 's PackagesEL5001 's pdf datasheet
EL5001IL
EL5001IL-T7
EL5001IL-T13
EL5001ILZ
SEE
NOTE-
EL5001ILZ-T7
EL5001ILZ-T13
EL5001IRE
EL5001IRE-T7
EL5001IRE-T13
EL5001IREZ
EL5001IREZ-T7
EL5001IREZ-T13




EL5001 Pinout, Pinouts
EL5001 pinout,Pin out
This is one package pinout of EL5001,If you need more pinouts please download EL5001's pdf datasheet.

EL5001 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

EL5001 Pb-Free EL5001 Cross Reference EL5001 Schematic EL5001 Distributor
EL5001 Application Notes EL5001 RoHS EL5001 Circuits EL5001 footprint