Triple Differential Receiver/Equalizer

The EL9111 and EL9112 are triple channel differential receivers and equalizers. They contains three high speed differential receivers with five programmable poles. The outputs of these pole blocks are then summed into an output Buffer The equalization length is set with the voltage on a single pin. Using the Enable pin on the EL9111 and EL9112 the outputs CAN be placed into a high impedance state enabling multiple devices to be connected in parallel and used in a multiplexing application.
The gain CAN be adjusted up or down on each channel by 6dB using its VGAIN control signal. In addition, a further 6dB of gain CAN be switched in to provide a matched drive into a cable.
The EL9111 and EL9112 have a bandwidth of 150MHz and consume just 108mA on 5V supply. A single input voltage is used to set the compensation levels for the required length of cable.
The EL9111 is a special version of the EL9112 that decodes syncs encoded onto the common modes of three pairs of CAT-5 cable by the EL4543. (Refer to the EL4543 datasheet for details.)
The EL9111 and EL9112 are available in a 28 Ld QFN package and are specified for operation over the full -40C to +85C temperature range.
By Intersil Corporation
EL9111 's PackagesEL9111 's pdf datasheet
EL9111IL QFN
EL9111IL-T13 QFN
EL9111IL-T7 QFN
EL9111ILZ QFN
EL9111ILZ-T13 QFN
EL9111ILZ-T7 QFN




EL9111 Pinout, Pinouts
EL9111 pinout,Pin out
This is one package pinout of EL9111,If you need more pinouts please download EL9111's pdf datasheet.

EL9111 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

EL9111 Pb-Free EL9111 Cross Reference EL9111 Schematic EL9111 Distributor
EL9111 Application Notes EL9111 RoHS EL9111 Circuits EL9111 footprint