DP83816 is a single-chip 10/100 Mb/s Ethernet Controller for the PCI bus. It is targeted at low-cost, high volume PC motherboards, adapter cards, and embedded systems. The DP83816 fully implements the V2.2 33 MHz PCI bus interface for host communications with ...
The DP83910A CMOS Serial Network Interface (SNI) is a direct-pin equivalent of the bipolar DP8391 SNI and provides the Manchester data encoding and decoding functions for IEEE 802.3 Ethernet Thin-Ethernet type local area networks. The SNI interfaces the DP8390 ...
The DP83865 is a fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-T, 100BASE-TX and 1000BASE-T Ethernet protocols. The DP83865 is an ultra low power version of the DP83861 and DP83891. It uses advanced 0.18 um, 1.8 ...
STE12PS is designed to supply power over
multiple Ethernet channels in order to avoid
different, individual power supply units for
applications such as Web cams, IP Phones,
Bluetooth access points and WLAN access
points. ...
The DS2172 Bit Error Rate Tester (BERT) is a software-programmable test pattern generator, receiver, and analyzer capable of meeting the most stringent error performance requirements of digital transmission facilities. Two categories of test pattern generation ...
The DS2175 is a low-power CMOS elastic-store memory optimized for use in primary rate telecommunications transmission equipment. The device serves as a synchronizing element between async data streams and is compatible with North American (T1-1.544MHz) and ...
The DS2186 T1/CEPT transmit line interface chip interfaces user equipment to North American (T1 1.544MHz) and European (CEPT 2.048MHz) primary rate communications networks. The device is compatible with all types of twisted pair and coax cable found in such ...
The DS2187 T1/CEPT receive line interface chip interfaces user equipment to North American (T1 1.544MHz) and European (CEPT 2.048MHz) primary rate communication networks. The device extracts clock and data from twisted pair or coax transmission media and ...
The DS2188 T1/CEPT jitter attenuator chip contains a 128 x 2-bit buffer that, in conjunction with an external 4X crystal, is used to attenuate the incoming jitter present in clock and data. The device meets all of the latest applicable specifications including ...
The DS2196 T1 dual framer LIU is designed for T1 transmission equipment. The DS2196 combines dual optimized framers together with a line interface unit. This combination allows the DS2196 user to extract and insert facility data-link (FDL) messages in the ...
The DS21600/DS21602/DS21604 are multiple-rate
clock adapters that convert between E-Carrier and T-Carrier
clocks rates. A T1 or E1 clock output,
CLKOUT1, is available, along with a higher multiple
rate clock output, CLKOUT2. CLKOUT1 and
CLKOUT2 are ...
The DS21600/DS21602/DS21604 are multiple-rate
clock adapters that convert between E-Carrier and T-Carrier
clocks rates. A T1 or E1 clock output,
CLKOUT1, is available, along with a higher multiple
rate clock output, CLKOUT2. CLKOUT1 and
CLKOUT2 are ...
The DS21600/DS21602/DS21604 are multiple-rate
clock adapters that convert between E-Carrier and T-Carrier
clocks rates. A T1 or E1 clock output,
CLKOUT1, is available, along with a higher multiple
rate clock output, CLKOUT2. CLKOUT1 and
CLKOUT2 are ...
The DS2174 enhanced bit error rate tester (EBERT) is a software-programmable test-pattern generator, receiver, and analyzer capable of meeting the most stringent error-performance requirements of digital transmission facilities. It features bit-serial, ...
HFBR-1402Z Ethernet Low Cost, Miniature Fiber Optic Components The HFBR-0400Z Series of components is designed to
provide cost efective, high performance fber optic com-
munication links for information systems and industrial
applications with ...
The PM4325 Octal Short Haul E1/T1/J1 Low Latency Transport Line Interface Unit (OCTLIU ST) is a monolithic integrated circuit suitable for use in low latency short haul T1, J1 and E1 systems with a minimum of external circuitry. The OCTLIU ST is ...
The PM4323 Octal E1/T1/J1 Low Latency Transport Line Interface Unit (OCTLIU LT) is a monolithic integrated circuit suitable for use in low latency long haul and short haul T1, J1 and E1 systems with a minimum of external circuitry. The OCTLIU LT is ...
The KS8695 Multi-Port Gateway-on-a-Chip
delivers a new level of networking integration and
performance for speeding broadband gateway
development. The key components integrated in the
KS8695 include:
Integrated layer-2 managed switch with five ...
The MT90528 28-Port Primary Rate Circuit Emulation AAL1 SAR allows primary rate TDM circuits to be carried
over ATM networks using Circuit Emulation Services. Up to 896 bidirectional ATM VC connections can be
simultaneously processed by the MT90528 CES AAL1 ...
Multi-purpose SONET/SDH VT/TU and
SONET/SDH STS/STM cross-connect.
With a memory-switch architecture,
implements a strictly non-blocking
switch that supports a VT/TU level
fabric of up to 45 Gbit/s.
Supports 18 high-speed Enhanced
SONET Serial ...
The S/UNI-9953 is a single chip ATM,
POS and 10 Gigabit Ethernet User-
Network Interface operating at 9953.28
Mbit/s and 10.3 Gbit/s. The S/UNI
9953 is intended for use in OC-192c
and high-density OC-48c POS/ATM
applications as well as 10 Gigabit ...