Critical Conduction Mode PFC Controller
The FAN7530 is an active power factor correction (PFC) controller for boost PFC applications that operates in critical conduction mode (CRM). It uses the voltage-mode PWM that compares an internal ramp signal with the error Amplifier output to generate MOSFET turn-off signal. Because the voltage-mode CRM PFC controller does not need rectified AC line voltage information, it saves the power loss of the input voltage sensing network necessary for the current-mode CRM PFC controller.
FAN7530 provides many protection functions, such as over-voltage protection, open-feedback protection, over-current protection, and under-voltage lockout protection. The FAN7529 CAN be disabled if the INV pin voltage is lower than 0.45V and the operating current decreases to 65A. Using a new variable on-time control method, THD is lower than the conventional CRM boost PFC ICs.
By Fairchild Semiconductor
|FAN7530N||Fairchild Semiconductor Corporation||CrCM PFC Controller, 8LD, MDIP, JEDEC MS-001, .300" WIDE, 3000/RAIL|
|FAN7530MX||Fairchild Semiconductor Corporation||CrCM PFC Controller, 8LD, SOIC,JEDEC MS-012, .150" NARROW BODY, 3000/TAPE REEL|
|FAN7530M||Fairchild Semiconductor Corporation||CrCM PFC Controller, 8LD, SOIC,JEDEC MS-012, .150" NARROW BODY, 8100/RAIL|
|FAN7530 Pb-Free||FAN7530 Cross Reference||FAN7530 Schematic||FAN7530 Distributor|
|FAN7530 Application Notes||FAN7530 RoHS||FAN7530 Circuits||FAN7530 footprint|