Dual Channel Video Drivers With Integrated Filters And Composite Video Summer

The FMS6400-1 is a dual Y/C 5th order Butterworth low-pass Video Filter optimized for minimum overshoot and flat group delay. The device also contains a summing circuit to generate filtered composite Video In a typical application, the Y and C input signals from DACs are AC coupled into the Filters Both channels have DC restore circuitry to clamp the DC input levels during Video sync. The Y and C channels use separate feedback clamps. The clamp pulse is derived from the Y channel.
All outputs are capable of driving 2Vpp, AC or DC coupled, into either a single or dual Video load. A single Video load consists of a series 75ohm impedance matching resistor connected to a terminated 75ohm line. This presents a total of 150ohm of loading to the part. A dual load would be two of these in parallel which would present a total of 75ohm to the part. The gain of the Y, C and CV signals CAN be selected for 0dB or 6dB with 1Vpp input levels. All Video channels are clamped are clamped during sync to establish the appropriate output Voltage Reference levels.
By Fairchild Semiconductor
FMS6400-1 's PackagesFMS6400-1 's pdf datasheet

FMS6400-1 Pinout, Pinouts
FMS6400-1 pinout,Pin out
This is one package pinout of FMS6400-1,If you need more pinouts please download FMS6400-1's pdf datasheet.

FMS6400-1 Application circuits
FMS6400-1 circuits
This is one application circuit of FMS6400-1,If you need more circuits,please download FMS6400-1's pdf datasheet.

Related Electronics Part Number

Related Keywords:

FMS6400-1 Pb-Free FMS6400-1 Cross Reference FMS6400-1 Schematic FMS6400-1 Distributor
FMS6400-1 Application Notes FMS6400-1 RoHS FMS6400-1 Circuits FMS6400-1 footprint