Precision S-Video Filter With Summed Composite Output, Sound Trap And Group Delay Compensation

The FMS6406 is a dual Y/C 5th-order Butterworth lowpass Video Filter optimized for minimum overshoot and flat group delay. The device also contains a summing circuit to generate filtered composite Video an Audio trap and group delay compensation circuit. The Audio trap removes Video information in the spectral location of the subsequent RF Audio Carrier The group delay circuit predistorts the signal to compensate for the inherent receiver IF Filters group delay distortion.
In a typical application, the Y and C input signals from DACs are AC-coupled into the Filters Both channels have DC-restore circuitry to clamp the DC-input levels during Video sync. The Y and C channels use separate feedback clamps. The clamp pulse is derived from the Y channel.
All outputs are capable of driving 2Vpp, AC or DC-coupled, into either a single or dual Video load. A single Video load consists of a series 75ohm impedance matching resistor connected to a terminated 75ohm line, this presents a total of 150ohm of loading to the part. A dual load would be two of these in parallel which would present a total of 75ohm to the part. The gain of the Y, C and CV signals is 6dB with 1Vpp input levels. All Video channels are clamped during sync to establish the appropriate output Voltage Reference levels.
By Fairchild Semiconductor
FMS6406 's PackagesFMS6406 's pdf datasheet
FMS6406CS SOIC
FMS6406CSX SOIC
FMS6406CSX-NL SOIC
FMS6406CS-NL SOIC




FMS6406 Pinout, Pinouts
FMS6406 pinout,Pin out
This is one package pinout of FMS6406,If you need more pinouts please download FMS6406's pdf datasheet.

FMS6406 Application circuits
FMS6406 circuits
This is one application circuit of FMS6406,If you need more circuits,please download FMS6406's pdf datasheet.


Related Electronics Part Number

Related Keywords:

FMS6406 Pb-Free FMS6406 Cross Reference FMS6406 Schematic FMS6406 Distributor
FMS6406 Application Notes FMS6406 RoHS FMS6406 Circuits FMS6406 footprint