Disciplined Reference And Synchronous Clock Generator

The FTS125 Frequency and Time Standard module is a GPs driven, Mixed-Signal phase lock loop, providing a 1PPS CMOS output from the CW25 and generating a 10MHz CMOS and a 10MHz SINE output from an intrinsically low jitter voltage controlled crystal Oscillator The FTS125 CAN lock to a 10MHz reference derived from the on-board GPs receiver or an external 10MHz reference or to an external 1PPS reference. Alarms are provided to indicate Loss-of-Lock, Holdover, and Antenna Fault. The on-board GPs receiver requires an outdoor mounted GPs Antenna for the best stability and consistent performance. The mode control inputs are used to manually Switch between references and/or holdover. The user application should monitor the alarm outputs and manually Switch modes as needed. By Connor-Winfield VCXOs
FTS125 's PackagesFTS125 's pdf datasheet



FTS125 Pinout, Pinouts
FTS125 pinout,Pin out
This is one package pinout of FTS125,If you need more pinouts please download FTS125's pdf datasheet.

FTS125 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

FTS125 Pb-Free FTS125 Cross Reference FTS125 Schematic FTS125 Distributor
FTS125 Application Notes FTS125 RoHS FTS125 Circuits FTS125 footprint