BGY67 200 MHz, 22 dB gain reverse amplifier,Hybrid amplifier module for CATV systems operating over a frequency range of 5 MHz
to 200 MHz at a voltage supply of 24 V (DC). The device is intended as a reverse amplifier
for use in two-way ...
The MAX9977 quad, low-power, high-speed, pin-electronics
driver includes, for each channel, a three-level
pin driver. The driver features a wide voltage range and
high-speed operation, includes high-impedance and
active-termination (3rd-level drive) modes, ...
The MAX1932 generates a low-noise, high-voltage output to bias avalanche photodiodes (APDs) in optical receivers. Very low output ripple and noise is achieved by a constant-frequency, pulse-width modulated (PWM) boost topology combined with a unique ...
The MAX3982 is a single-channel, copper-cable preemphasis driver that operates from 1Gbps to 4.25Gbps. It provides compensation for copper links, such as
4.25Gbps Fibre Channel, allowing spans of up to 15m with 24AWG. The cable driver provides four selectable ...
The MAX3620 series is a family of high-performance
passive delay lines for use in QDR/QDRII synchronous
memory systems. These delay lines support high-speed
transceiver logic (HSTL) source terminated transmission
with an unterminated load at the receiver, ...
The MAX3787 is a 1Gbps to 12.5Gbps equalization network that compensates for transmission medium losses encountered with FR4 and cables. The equalization network is composed entirely of passive components and functions equally well for 8b/10b or scrambled ...
The MAX3750/MAX3751 are +3.3V, Fibre Channel port bypass ICs that include a high-speed multiplexer and output buffer stage for hot swapping a storage device. These devices are optimized for use in a Fibre Channel arbitrated loop topology. The MAX3750 has ...
The MAX3750/MAX3751 are +3.3V, Fibre Channel port bypass ICs that include a high-speed multiplexer and output buffer stage for hot swapping a storage device. These devices are optimized for use in a Fibre Channel arbitrated loop topology. The MAX3750 has ...
The MAX3980 quad equalizer provides compensation
for transmission medium losses for four \"lanes\" of digital
NRZ data at a 3.125Gbps data rate in one package.
It is tailor-made for 10-Gigabit Ethernet (10GbE) backplane
applications requiring attenuation ...
The MAX3981 quad equalizer provides compensation for transmission medium losses for four \"lanes\" of digital NRZ data at a data rate of 3.125Gbps in one
package. It is tailor-made for 10Gigabit Ethernet applications that require attenuation of noise and ...
The MAX3784/MAX3784A 5Gbps equalizers provide
compensation for transmission-medium losses in up to
40in of FR-4. They are optimized for short-run length
and balanced codes such as 8b10b, as found in multiplexed
1.25Gbps Ethernet systems and 4.25Gbps
Fibre ...
The MAX3785 6.25Gbps equalizer operates from a single
1.8V supply and compensates for transmission-medium
losses encountered with FR4 transmission
lines. Optimized for low-voltage, high-density, DC-coupled
interconnections between the line card and ...
The MAX3786 is an AC-coupled, serial-ATA (SATA)-compatible, 1.5Gbps multiplexer/buffer (mux/buffer) IC that provides the capability to switch a single serial data signal between two redundant I/O channels. SATA out-of-band (OOB) signaling is supported ...
The MAX3940 is designed to drive an electro-absorption modulator (EAM) at data rates up to 10.7Gbps. It incorporates the functions of a biasing circuit and a modulation circuit, with integrated control op amps externally programmed by DC voltages. The ...
The MAX3941 is designed to drive an electro-absorption modulator (EAM) at data rates up to 10.7Gbps. It incorporates the functions of a biasing circuit and a modulation circuit, with integrated control op amps externally programmed by DC voltages. The ...
The MAX3805 is designed to provide up to 30in (0.75m) reach on 6-mil differential FR-4 transmission line, or up to 24ft (8m) on RG-188A/U type coaxial cable, for PRBS data from 9.95Gbps to 10.7Gbps. The MAX3805 adaptive equalizer reduces intersymbol ...
The MAX3983 is a quad copper-cable signal conditioner that operates from 2.5Gbps to 3.2Gbps. It provides compensation for 4x copper InfiniBand and 10Gbase-CX4
Ethernet links, allowing spans of 20m with 24AWG and 15m with 28AWG. The cable driver section ...
OF3600B-C2 is an optical receiver module for digital transmission systems up to 156Mbps. It uses an InGaAs
avalanche photodiode with a low noise preamplifier. Package style is a hermetically sealed coaxial package with a
single mode fiber pigtail. ...
The OF3638R-C3 is a receiver optical sub-assembly(ROSA) for 2.5Gbps transmission. It uses an InGaAs
avalanche photodiode with a low noise preamplifier in a hermetically sealed coaxial package. It incorporates a
receptacle having a ...
OL5170M is a 1550-nm electro-absorption (EA) modulated DFB laser (EMwL) module for 10 Gb/s
applications. The package contains an EMwL chip, an optical isolator, a rear-facet monitor photodiode,
and a thermoelectric cooler. ...
The OD9245N is the 10Gbps receiver module which incorporates a high speed pin-photodiode and a
High Gain trans-impedance amplifier (TIA). This receiver is specifically designed for OC-192
SONET/SDH STM-64,DWDM and 10-Gbps Ethernet applications. The ...
The ZL60101 and ZL60102 together make a very high speed transmitter/receiver pair for parallel fiber applications. The ZL60102 receiver module converts parallel optical input signals via a PIN photodiode array and a transimpedance and limiting amplifier into ...
This unique Resonant Cavity Surface-Emitting LED (RCLED) is designed for optical communications over Plastic Optical Fiber (POF) in applications such as IEEE1394b (S100, S200) and 155 Mbps ATM. For very high speed operation, e.g., above 200 Mbps, an electrical ...
The growing use of the Internet has created increasingly higher demand for multi-Gbps I/O performance. The demand for 100+ Gbps WAN bandwidth fuels the growth of short-reach 40 Gbps infrastructures within high-end telco and datacom routers, switches, servers ...
The growing use of the Internet has created increasingly higher demand for multi-Gbps I/O performance. The demand for 40+ Gbps WAN bandwidth fuels the growth of short-reach 10 Gbps infrastructures within high-end telco and datacom routers, switches, servers ...
A full data sheet is available for qualified customers, please contact Sales.The Zarlink ZL62089 receiver is a patented twelve-channel, monolithic SiGe BiCMOS integrated circuit that combines high-sensitivity transimpedance amplifiers with high-gain limiting ...
The CXA3668N is an IC that performs reception side
analog signal processing for optical communication
in combination with an infrared photodiode within a
Digital Infrared Audio Transmission (DIAT) system. ...
The CXD4016R is an IC that processes the transmitted digital signals used for infrared spatial digital audio
communication (based on the IEC61603-8-1 standard) in consumer products. This IC contains the digital-to-
analog converter (DAC) and a PLL circuit ...
The CXD4017R is an IC that processes the
received digital signals used for infrared spatial digital
audio communication (based on the IEC61603-8-1
standard) in consumer products. This IC contains the
analog-to-digital converter (ADC) for RF ...
The TriQuint TGA4819-SL is part of a series
of optical driver amplifiers suitable for a
variety of driver applications.
The TGA4819-SL is a medium power
wideband AGC amplifier that typically
provides 20dB small signal gain with 20dB
AGC range.
The ...
The TriQuint TGA4953-SL is part of a series of
surface mount modulator drivers suitable for a
variety of driver applications and is compatible with
Metro MSA standards.
The TGA4953-SL consists of two high performance
wideband amplifiers combined with ...
The TriQuint TGA4954-SL is part of a series of
surface mount modulator drivers suitable for a
variety of driver applications and is compatible with
Metro MSA standards.
The TGA4954-SL consists of two high performance
wideband amplifiers combined with ...
The TriQuint TGA8652-EPU is a medium power wideband
AGC amplifier combined with off chip circuitry assembled in
a Surface Mount Package. The TGA8652-EPU typically
provides 16dB small signal gain with 6dB AGC range.
Typical input and output return loss is ...
The ML4622CS is a high performance, low noise, wideband, bipolar monlithic IC designed specifically for signal recovery applications in fiber optic receiver systems. It contains a wideband limiting amplifier which is capable of accepting an input signal as low ...
The HFBR-1116/-2116 series of data links are high-
performance, cost-efficient, transmitter and receiver
modules for serial optical data communication
applications specified at 155 MBd for ATM UNI
applications. ...
The HFBR-1116TZ/-2116TZ series of data links are
high-performance, cost-efficient, transmitter and
receiver modules for serial optical data communication
applications specified at 155 MBd for ATM UNI
applications. ...
SPFMOR302 Automotive Polymer Optical Fiber The 4-pin MOST Optical Receiver (MOR3 02) is a highly
integrated CMOS IC combined with a high speed PIN
- diode designed to receive up to 25Mbit/s optical data
which is bi-phase coded at up ...
SPFMPR302 Automotive Polymer Optical Fiber The 4-pin MOST Optical Receiver (MPR3 02) is a highly
integrated CMOS IC combined with a high speed PIN
- diode designed to receive up to 25Mbit/s optical data
which is bi-phase coded at up ...
Digital Optically Isolated Modulator The PS9551L4 Optically isolated Sigma-delta Modulator allows direct measurement of motor phase currents in
power inverters.
The PS9551L4 containing a Sigma-delta(- ) over-sampling modulator and a GaAlAs LED on ...
40 Gb/s EA Modulator With Single Mode Fiber, Built-in Cooler,OM5642W-30B is a C-band electro-absorption (EA) modulator for 40 Gb/s operation with low PDL
characteristics in a hermetic sealed package with a V connector. ...
OM5653C-30B is a C-band electro-absorption (EA) modulator for 40 Gb/s operation with low chirp
characteristics in a hermetic sealed package with a V connector. ...
This sheet is defining a target specification of OL5157M, which is a 1550-nm DFB laser diode
monolithically integrated with an electro-absorption (EA) modulator for 40 Gb/s operation in a 7-pin
package with a V-connector and a DC-bias ...
The KGL4145JW is a high performance electroabsorption modulator and direct modulated
LASER diode driver for SONET/SDH and 10GbE applications up to 11.1Gb/s. The device
provides typically 3Vpp single-ended output, output amplitude control, output offset ...
The KGL4145KW is a high performance electroabsorption modulator and direct modulated
LASER diode driver for SONET/SDH and 10GbE applications up to 11.3Gb/s. The device
provides typically 3Vpp single-ended output, output amplitude control, output offset ...
11.3 Gbps Modulator Driver IC,KGL4195KD is a high performance electroabsolute modulator and direct modulated LASER diode driver IC for
sonet/SDH and 10GBE applications up to 11.3Gbps.
The device provids typically 3.0Vpp output , output amplitude ...
11.3 Gbps Modulator Driver IC,KGL5115KD is a high performance electroabsolute modulator and direct modulated LASER diode driver IC for
sonet/SDH and 10GBE applications up to 11.3Gbps.
The device provids typically 2.3Vpp output , output amplitude ...
11.3 Gbps EA Modulator Driver IC,KGA4195 is a high performance electroabsolute modulator and direct modulated LASER diode driver IC for
sonet/SDH and 10GBE applications up to 11.3Gbps.
The device provids typically 3.0Vpp output , output ...
11.3Gbps AGC Amplifier IC,The KGL4142KD is a high performance automatic gain control amplifier for SONET/SDH and
10GbE applications up to 11.3Gb/s,especially using EDC. The device has wide gain control
range : -10dB to 28dB ...
The SY89207L is a differential receiver amplifier optimized
for crystal oscillator applications. The device includes an
additional low differential gain (+10V/V) output stage (QFB)
ideal for feedback applications common in crystal oscillator
gain blocks. ...
The CTS 20x4G is designed to interface
directly to Fibre Channel disk drives in a
storage array. It can interface directly to
optics or to cables at the ingress/egress
point of an enclosure and is able to
determine if an incoming frame is
destined ...
The VSC7145 is a dual-speed Fibre
Channel, Gigabit Ethernet and
InfiniBand Serializer/Deserializer
(SerDes) optimized for performance
and power in an industry-standard
pinout. It accepts 10-bits of SSTL, 8B/
10B encoded transmit data, latches ...