Dual Usb High-side Power Switch

The G526 is a dual integrated high-side power Switch with independent enable and flag functions, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The G526 satisfies the following USB requirements: the switch's low on-resistance meets USB voltage drop requirements; fault current is limited to typically 750mA, well below the UL 25VA safety requirement; and flag outputs are available to indicate fault condi- tions to the local USB controller. Soft start eliminates the momentary voltage drop on the upstream port that may occur when the Switch is enabled in bus-powered applications. Additional features include thermal shutdown to pre- vent catastrophic Switch failure from high-current loads, under-voltage lockout (UVLO) ensuring that the device remains off unless there is a valid input voltage pre- sent, and an enable input that is compatible with both 3.3V and 5V Logic The G526 is available in active-high and active-low enable versions in 8-pin SOIC packages. By Unkown
G526 's PackagesG526 's pdf datasheet

G526 Pinout, Pinouts
G526 pinout,Pin out
This is one package pinout of G526,If you need more pinouts please download G526's pdf datasheet.

G526 Application circuits
G526 circuits
This is one application circuit of G526,If you need more circuits,please download G526's pdf datasheet.

Related Electronics Part Number

Related Keywords:

G526 Pb-Free G526 Cross Reference G526 Schematic G526 Distributor
G526 Application Notes G526 RoHS G526 Circuits G526 footprint