Usb Ps/2 Mouse Microcontroller

The GL603USB is a 8-bits RISC-like high performance Microcontroller with a built-in 1.5Mbps SIE and transceiver. The Microcontroller features 33 instructions optimized for USB and PS/2 mouse. There are 64 bytes on-chip RAM and 2.75K x 14 program ROM incorporated into the Microcontroller Because the GL603USB build in a Clock Generator circuit, it CAN accepts a 6 MHz ceramic Resonator or a crystal as its Clock source. The Clock Generator CAN generate 12 MHz Clock for micro-controller to sense mouse tracking signal. The Clock is only enabled when bit 1 of PORTCON1 Register is cleared. In default firmware, it indicates the controller is running on PS/2 mouse mode. The sampling rate of mouse tracking signal CAN be up to 100 us in USB mode and 80 us in PS/2 mode. The micro-controller features 13 general purpose I/Os (GPIOs). 8 GPIO pins build in 4 bits ADC for photo-sensor input to remove the expensive process of matching LED and photo-sensor. Additionally, 2 GPIO pins are strong enough to drive LEDs The other 3 GPIO pins is used for mouse buttons by default firmware. Beside the 13 GPIO pins, another 2 GPIO pins combined with USB D+/D- functions CAN be used as DATA and CLK in PS/2 mode. Legacy USB cable CAN be used for mouse in USB mode and an USB to PS/2 converter is required in PS/2 mode. All GPIO ports feature low EMI emissions as a result of improved output drivers with slew-rate control. By Unkown
GL603USB 's PackagesGL603USB 's pdf datasheet



GL603USB Pinout, Pinouts
GL603USB pinout,Pin out
This is one package pinout of GL603USB,If you need more pinouts please download GL603USB's pdf datasheet.

GL603USB circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

GL603USB Pb-Free GL603USB Cross Reference GL603USB Schematic GL603USB Distributor
GL603USB Application Notes GL603USB RoHS GL603USB Circuits GL603USB footprint