Cable Driver With Two Adjustable Outputs

The GENLINX GS9008 is a bipolar integrated circuit designed to drive two 75 co-axial cables at data rates exceeding 400 Mb/s. It directly Interfaces with other GENLINX devices and CAN also be used as a general purpose high speed cable driver. While there are no plans to discontinue the GS9008 Gennum has developed a successor product with improved features and performance called the GS9028. The GS9028 is recommended for new designs. The differential inputs are AC-coupled and internally DC- restored which allows correct passage of pathological check codes associated with the serial digital standards. Even though the inputs are AC coupled, static protection Diodes at each input restrict the DC differential so that if the driving source uses the opposite polarity power supply, external DC blocking capacitors must be used. Correctly terminated output signal levels are adjustable from as low as 0 mV to as high as 1100 mV with little change in other performance parameters. Performance is guaranteed for output levels between 600 mV and 1000 mV. The gain of the output stages is varied by adjusting the VSET voltage with respect to an internal band gap reference voltage VREF . The GS9008 is packaged in an 8 pin SOIC, and operates from a single +5 or -5 volt supply consuming typically only 170 mW of power . By Unkown
GS9008 's PackagesGS9008 's pdf datasheet

GS9008 Pinout, Pinouts
GS9008 pinout,Pin out
This is one package pinout of GS9008,If you need more pinouts please download GS9008's pdf datasheet.

GS9008 Application circuits
GS9008 circuits
This is one application circuit of GS9008,If you need more circuits,please download GS9008's pdf datasheet.

Related Electronics Part Number

Related Keywords:

GS9008 Pb-Free GS9008 Cross Reference GS9008 Schematic GS9008 Distributor
GS9008 Application Notes GS9008 RoHS GS9008 Circuits GS9008 footprint