Gs9009 Cable Driver With Four Adjustable Outputs

The GENLINX GS9009 is a bipolar integrated circuit designed to drive four 75 co-axial cables at data rates exceeding 400 Mb/s. It directly Interfaces with other GENLINX devices and CAN also be used as a general purpose high speed cable driver. The differential inputs are AC-coupled and internally DC- restored which allows correct passage of pathological check codes associated with the serial digital standards. Even though the inputs are AC coupled, static protection Diodes at each input restrict the DC differential so that if the driving source uses the opposite polarity power supply, external DC blocking capacitors must be used. Correctly terminated output signal levels are adjustable from as low as 0 mV to as high as 1100 mV with little change in other performance parameters. Performance is guaranteed for output levels between 600 mV and 1000 mV. The gain of the output stages is varied by adjusting the VSET voltage with respect to an internal bandgap reference voltage VREF . Pinout is compatible with the GS9007 by interchanging pins 3,4,5,6,9,10,11,12 on the GS9009 with pins 1,2,3,4,5,6,7,8 on the GS9007. In this way, a layout CAN be made for either device depending on whether adjustability is desired or not. The GS9009 is packaged in a 14 pin SOIC, and operates from a single +5 or -5 volt supply consuming typically only 250 mW of power. By Unkown
GS9009 's PackagesGS9009 's pdf datasheet

GS9009 Pinout, Pinouts
GS9009 pinout,Pin out
This is one package pinout of GS9009,If you need more pinouts please download GS9009's pdf datasheet.

GS9009 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

GS9009 Pb-Free GS9009 Cross Reference GS9009 Schematic GS9009 Distributor
GS9009 Application Notes GS9009 RoHS GS9009 Circuits GS9009 footprint