The UPD168103 is the motor driver IC with IRIS control circuit, operational amplifier and 4-ch H-bridge output.
Smooth operation is possible for IRIS control with linear method.
The package is 48-pin thin type QFN and then it helps reduce the ...
The UPD168117A is a 7-channel H-Bridge Driver with a micro step function supporting pulse input that consists of a
CMOS control circuit and a MOS output stage. It can reduce the current consumption and the voltage loss at the
output stage compared with a ...
The UPD168103A is the motor driver IC with IRIS control circuit, operational amplifier and 4-ch H-bridge output.
Smooth operation is possible for IRIS control with linear method.
The package is 48-pin thin type QFN and then it helps reduce the mounting ...
The UPD168001 is a monolithic 4-channel H bridge driver and low-side switch IC that uses a power MOSFET at
the output stage. Because of the MOSFET at the output stage, both the inputs and outputs are interfaced by PWM
digital signals, and the power ...
The UPD168110 is a monolithic 2-channel H bridge driver that consists of a CMOS controller and a MOS output
stage. It can reduce the current consumption and the voltage loss at the output stage compared with a conventional
driver using bipolar ...
The UPD168112 is a monolithic 6-channel H-Bridge Driver that consists of a CMOS controller and a MOS output
stage. Compared with existing drivers that use bipolar transistors, this H-Bridge Driver can lower the current
consumption and voltage loss at the ...
The UPD16835A is a monolithic quad H bridge driver IC that employs a CMOS control circuit and a MOS FET
output circuit. Because it uses MOS FETs in its output stage, this driver IC consumes less power than conventional
driver ICs that use bipolar ...
The UPD16878 is a monolithic quad H bridge driver IC that employs a CMOS control circuit and a MOS FET
output circuit. Because it uses MOS FETs in its output stage, this driver IC consumes less power than conventional
driver ICs that use bipolar ...
The UPD168002 is a monolithic 6-channel H-Bridge Driver that consists of a CMOS control circuit and a MOS output
stage. It can reduce the current consumption and the voltage loss at the output stage compared with conventional
driver using bipolar ...
The UPD168302 is monolithic dual H-Bridge Driver LSI which uses power MOS FETs in the output stages. By using
the MOS process, this driver has substantially improved the voltage loss of the output stage and power consumption
as compared with conventional ...
The UPD168113 is a serial control 7-channel H-Bridge Driver that consists of a CMOS controller and a MOS output
stage. It can reduce the current consumption and the voltage loss at the output stage compared with a conventional
driver using bipolar ...
The UPD16808 is a monolithic dual H bridge driver circuit which employing N-channel power MOS FETs for its driver
stage. By using the power MOS FETs for the output stage, saturation voltage and power consumption are substantially
improved as compared with ...
This IC UPD16823 is a monolithic H bridge driver employing a horizontal N-channel power MOS FET for its driver stage.
It is provided with forward/reverse and brake functions and is ideal as a driver circuit for a motor that winds or
rewinds the film in a ...
The UPD16837 is a monolithic quad H-Bridge Driver employing power MOS FETs in the output stage. The MOS FETs
in the output stage lower the saturation voltage and power consumption as compared with conventional drivers using bipolar
transistors.
In ...
UPD16857 is monolithic 6 channel H-Bridge Driver employing power MOS FETs in the output stages. The MOS
FETs in the output stage lower the saturation voltage and power consumption as compared with conventional drivers
using bipolar transistors. ...
The UPD16877 is monolithic quad H-Bridge Driver LSI which uses power MOSFETs in the output stages. By using
the MOS process, this driver IC has substantially improved saturation voltage and power consumption as compared
with conventional driver circuits ...
The UPD16879 is a monolithic quad H bridge driver IC that employs a CMOS control circuit and a MOSFET output
circuit. Because it uses MOSFETs in its output stage, this driver IC consumes less power than conventional driver
ICs that use bipolar ...
The UPD16886 is a monolithic H bridge driver LSI that employs N-channel MOSFETs in its output stage.
This IC incorporates a 1.5-channel H bridge circuit and can control two motors that do not operate at the same
time. In addition, forward/reverse, brake, ...
The UPD168101 is monolithic quad H-Bridge Driver LSI which uses power MOSFETs in the output stages. By
using the MOS process, this driver IC has substantially improved the voltage loss of the output stage and power
consumption as compared with conventional ...
The UPD16813 is a monolithic dual H bridge driver circuit which uses power MOS FETs in its driver stage. By
complementing the P channel and N channel of the output stage, the circuit current has been substantially inproved
as compared with that of ...
UPD16805 is the monolithic and H bridge driver IC which consists of a CMOS control circuit and a MOS output
stage. As compared with the driver of a MOS process using the conventional bipolar transistor, reduction of
consumption current and power ...
The UPD16818 is a monolithic dual H bridge driver IC which uses N-channel power MOS FETs in its output stage. By
employing the power MOS FETs for the output stage, this driver circuit has a substantially improved saturation voltage and
power consumption ...
The UPD16835 is a monolithic quad H bridge driver IC that employs a CMOS control circuit and a MOS FET output
circuit. Because it uses MOS FETs in its output stage, this driver IC consumes less power than conventional driver
ICs that use bipolar ...
The A3946 is designed specifically for applications that require
high power unidirectional DC motors, three-phase brushless DC motors,
or other inductive loads. The A3946 provides two high-current gate
drive outputs that are capable of driving a wide range ...
ROHM offers a wide lineup of H-bridge drivers BD6210, BD6211, BD6212, BD6215, BD6216, BD6217 in different supply voltages (7V/18V/36V) and output currents (0.5A/1A/2A) to meet the needs of a variety of applications. Our standard products also contain a VREF ...
ROHM offers a wide lineup of H-bridge drivers BD6220, BD6221, BD6222, BD6225, BD6226, BD6227 in different supply voltages (7V/18V/36V) and output currents (0.5A/1A/2A) to meet the needs of a variety of applications. Our standard products also contain a VREF ...
ROHM offers a wide lineup of H-bridge drivers BD6230, BD6231, BD6232, BD6235, BD6236, BD6237 in different supply voltages (7V/18V/36V) and output currents (0.5A/1A/2A) to meet the needs of a variety of applications. Our standard products also contain a VREF ...
The NJM2670 is a general-purpose 60V dual H-bridge drive IC. It consists of a pair of H-bridgesa thermal shut down circuit and its alarm output. The alarm output can detect application problems and the system reliability will be significantly improved if ...
The NJM2672 is a dual H-Bridge Driver it consists of a LS-TTL compatible logic input stage and pair of H-bridges with a protection diode. The maximum output current is 500mA per channel.NJM2672 is able to make up pulse input stepper motor system when using ...
The NJU7381 is a dual H-Bridge Driver IC especially developed for low voltage small stepper motor applications.A pair of high efficiency CMOS H-bridge drivers, a built-in end-detection comparator and the advanced 2.5mm-square FFP package make it suitable for ...
The NJU7382 is a dual H-Bridge Driver IC especially developed low voltage small stepper motor applications. It consists of a pair of low consumption CMOS H-bridge drivers protected by thermal shutdown circuit.It is also including a general-purpose comparator ...
The SA60 is a pulse width modulation ampli,er that can sup-
ply 10A continuous current to the load. The full bridge ampli,er
can be operated over a wide range of supply voltages. All of
the drive/control circuitry for the lowside and highside ...
The MP8040 is a general purpose, high frequency half bridge power driver capable of driving a 9A load. The device integrates both top and bottom N-Channel MOSFET power switches and is fully protected from both sourcing and sinking current by a preset cycle by ...
The MP8042 is a dual channel power half- bridge that can be configured as the output stage of a Class-D audio amplifier. Each channel can be driven independently as stereo single ended audio amplifiers, or driven complementary in a bridge tied load (BTL) audio ...
The TPIC0107B is a PWM control intelligent H-bridge designed specifically for dc motor applications. The
device provides forward, reverse, and brake modes of operation. A logic supply voltage of 5 V is internally
derived from VCC.
The TPIC0107B has an ...
The IR2108 IR2108S IR21084 IR21084S are high voltage, high speed
power MOSFET and IGBT drivers with depen-
dent high and low side referenced output
channels. Proprietary HVIC and latch immune
CMOS technologies enable ruggedized monolithic ...
The IR2161 is a dedicated Intelligent Half bridge Driver IC for a Halogen convertor (electronic transformer). It
includes all necessary protection features and also allows the Convertor to be dimmed externally with a
standard phase cut dimmer with both ...
The IR2214SS/IR22141SS is a gate driver suited to drive
a single half bridge in power switching applications. The
high gate driving capability (2A source, 3A sink) and the
low quiescent current enable bootstrap supply techniques in medium power
systems. ...
The ADuM12301
is an isolated half-bridge gate driver that
employs Analog Devices iCoupler technology to provide
independent and isolated high-side and low-side outputs.
Combining high speed CMOS and monolithic transformer
technology, this isolation ...
BD6735FV is a DMOS-driven 2-channel H-bridge motor driver. The
driver is capable of driving both DC motors and stepping motors,
and can be switched between forward, reverse, brake and
shutdown (idle) modes according to the input logic. ...
The TPIC1505 is a monolithic power array that
consists of ten electrically isolated N-channel
enhancement-mode power DMOS transistors,
four of which are configured as a full H-bridge and
six as a triple half H-bridge. The lower stage of the
full H-bridge ...
The TPIC0108B is a PWM control intelligent H-bridge designed specifically for dc motor applications. The
device provides forward, reverse, and brake modes of operation. A logic supply voltage of 5 V is internally
derived from VCC.
The TPIC0108B has an ...
The IR2114/IR21141/IR2214/IR22141 gate driver family is suited to drive a single
half bridge in power switching applications. The high gate driving capability (2A
source, 3A sink) and the low quiescent current enable bootstrap supply
techniques in ...
The IR21531(D)(S) are an improved version of the
popular IR2155 and IR2151 gate driver ICs, and in-
corporates a high voltage half-bridge gate driver with a front end oscillator similar to the industry standard
CMOS 555 timer. The IR21531 provides more ...