Radiation Hardened Synchronous 4-bit Up/down Counter Corporation

The Intersil HCS190MS is an asynchronously presettable BCD Decade synchronous Counter Presetting the Counter to the number on the preset data inputs (P0 - P3) is accomplished by a low on the parallel load input (PL). Counting occurs when (PL) is high, Count Enable (CE) is low and the Up/Down (U/D) input is either low for up-counting or high for down-counting. The Counter is incremented or decremented synchronously with the low-to-high transition of the Clock When an overow or underow of the Counter occurs, the Terminal Count output (TC), which is low during counting, goes high and remains high for one Clock cycle. This output CAN be used for look- ahead carry in high speed cascading. The TC output also initiates the Ripple Clock output (RC) which, normally high, goes low and remains low for the low-level portion of the Clock pulse. These Counter CAN be cascaded using the Ripple Carry output. If the decade Counter is preset to an illegal state or assumes an illegal state when power is applied, it will return to the normal sequence in one or two counts. The HCS190MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of radiation hardened, high-speed, CMOS/SOS Logic Family. The HCS190MS is supplied in a 16 lead Ceramic atpack (K sufx) or a SBDIP Package (D sufx). By Intersil Corporation
HCS190MS 's PackagesHCS190MS 's pdf datasheet
HCS190DMSR
HCS190KMSR




HCS190MS Pinout, Pinouts
HCS190MS pinout,Pin out
This is one package pinout of HCS190MS,If you need more pinouts please download HCS190MS's pdf datasheet.

HCS190MS circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

HCS190MS Pb-Free HCS190MS Cross Reference HCS190MS Schematic HCS190MS Distributor
HCS190MS Application Notes HCS190MS RoHS HCS190MS Circuits HCS190MS footprint
Hot categories