75 DB Logarithmic Detector/Controller SMT, 0.05 - 4.0 GHz
The HMC600LP4 HMC600LP4E Logarithmic Detector/Controller converts RF signals at its input, to a proportional DC voltage at its output. The HMC600LP4 HMC600LP4E ) employs a successive compression topology which delivers extremely high dynamic range and conversion accuracy over a wide input frequency range. As the input power is increased, successive Amplifiers move into saturation one by one creating an accurate approximation of the logarithm function.
The output of a series of square law detectors is summed, converted into voltage domain and buffered to drive the LOGOUT output. For detection mode, the LOGOUT pin is shorted to the VSET input, and will provide a nominal logarithmic slope of 19mV/dB and an intercept of -95 dBm. The HMC600LP4 E) CAN also be used in the controller mode where an external voltage is applied to the VSET pin, to create an AGC or APC feedback loop.
By Hittite Microwave Corporation
|HMC600LP4 Pb-Free||HMC600LP4 Cross Reference||HMC600LP4 Schematic||HMC600LP4 Distributor|
|HMC600LP4 Application Notes||HMC600LP4 RoHS||HMC600LP4 Circuits||HMC600LP4 footprint|