Rad-Hard Triple Line Transmitter, Triple Line Receiver, Triple Party-line Receiver

HS-246RH Radiation Hardened Triple Line Receiver
The HS-245RH, HS-246RH HS-248RH radiation hardened triple line transmitter and triple line receivers are fabricated using the Intersil dielectric isolation process. These parts are identical in pinout and function to the original HS-245RH, HS-246RH HS-248RH . They are also die size and bond pad placement compatible with the original parts for those customers who buy dice for hybrid assembly.
Each transmitter-receiver combination provides a digital Interface between systems linked by 100 twisted pair, shielded cable. Each device contains three circuits fabricated within a single monolithic chip. Data rates greater than 15MHz are possible depending on transmission line loss characteristics and length.
The transmitter employs constant current switching which provides high noise immunity along with high speeds, low power dissipation, low EMI generation and the ability to drive high capacitance loads. In addition, the transmitters CAN be turned off allowing several transmitters to timeshare a single line.
Receiver input/output differences are shown in the table: The internal 100 cable termination consists of 50 from each input to ground. PART NO.
By Intersil Corporation
HS-246RH 's PackagesHS-246RH 's pdf datasheet
HS1-246RH-8 DIP
HS1-246RH-Q DIP
HS9-246RH-8
HS9-246RH-Q




HS-246RH Pinout, Pinouts
HS-246RH pinout,Pin out
This is one package pinout of HS-246RH,If you need more pinouts please download HS-246RH's pdf datasheet.

HS-246RH circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

HS-246RH Pb-Free HS-246RH Cross Reference HS-246RH Schematic HS-246RH Distributor
HS-246RH Application Notes HS-246RH RoHS HS-246RH Circuits HS-246RH footprint