The ADS1208 is a 2nd-order (delta-sigma) modulator operating at a 10MHz clock rate. The specified input range is 100mV, optimized for current measurement with a Hall sensor, especially in motor control applications. The ADS1208 contains a programmable current ...
The AD22151 is a linear magnetic field transducer. The sensor
output is a voltage proportional to a magnetic field applied
perpendicularly to the package top surface.
The sensor combines integrated bulk Hall cell technology and
instrumentation circuitry to ...
Position & Current Sensing TLE4990 Programmable Linear Output Hall Sensor The linear Hall IC TLE4990 has been designed specifically to meet the demands of
highly accurate rotation and position detection, as well as for current measurement ...
Hall-Effect Switches for magnetic field applications TLE4906H The TLE4906H and the TLE4906L are integrated circuit Hall-effect sensors designed
specifically for highly accurate applications.
Precise magnetic switching points and high temperature stability ...
Hall-Effect Switches for magnetic field applications TLE4946H The TLE4946H and the TLE4946-1L are integrated circuit Hall-effect sensors designed
specifically for highly accurate applications.
Precise magnetic switching points and high temperature ...
Hall-Effect Switches for magnetic field applications TLE4976-1H The TLE4976-1H and the TLE4976L are integrated circuit Hall-effect sensors designed
specifically for highly accurate applications.
Precise magnetic switching points and high temperature ...
Hall-Effect Switches for magnetic field applications TLE4966H The TLE4966H and the TLE4966L are integrated circuit double Hall-effect sensors
designed specifically for highly accurate applications. Precise magnetic switching points
and high temperature ...
Hall-Effect Switches for magnetic field applications TLE4905G Uni- and Bipolar Hall IC Switches for
Magnetic Field Applications TLE4905G
TLE4935G
TLE4945-2G (Unipolar/Bipolar Magnetic Field Switches) have been designed
specifically for automotive and ...
Hall-Effect Switches for magnetic field applications TLE4935L Uni- and Bipolar Hall IC Switches for
Magnetic Field Applications TLE4905L
TLE4935L
TLE4935-2L
TLE4945L
TLE4945-2L (Unipolar/Bipolar Magnetic Field Switches) have been designed ...
The differential Hall effect sensor TLE4923 is compatible to the TLE4921-3U, except for
having a 2-wire interface. The TLE4923 provides high sensitivity, a superior stability over
temperature and symmetrical thresholds in order to achieve a stable duty ...
The Hall Effect sensor IC TLE4941 is designed to provide information about rotational
speed to modern vehicle dynamics control systems and ABS. The output has been
designed as a two wire current interface. The sensor operates without external
components ...
The Hall Effect sensor IC TLE4942-1 is designed to provide information about rotational
speed, direction of rotation, assembly position and limit airgap to modern vehicle dynamics
control systems and ABS. The output has been designed as a two wire current ...
The linear Hall IC TLE4997I has been designed specifically to meet the demands of
highly accurate rotation and position detection, as well as for current measurement
applications.
The sensor provides a ratiometric analog output voltage which is ideally ...
AH266 is an integrated Hall sensor with output drivers designed
for electronic commutation of brush-less DC motor applications.
The device includes an on-chip Hall voltage generator for
magnetic sensing, a comparator that amplifies the Hall voltage, a ...
AH276 are integrated Hall sensors with output drivers, mainly
designed for electronic commutation of brush-less DC Fan. This
IC internally includes the regulator, protecting diode, Hall plate,
amplifier, comparator, and a pair of complementary ...
AH1751 is a single-digital-output Hall-effect sensor for high
temperature operation. The device includes an on-chip Hall
voltage generator for magnetic sensing, an amplifier to amplify
Hall voltage, and a comparator to provide switching hysteresis for ...
The AH49E is a small, versatile linear Hall-effect
device that is operated by the magnetic field from a
permanent magnet or an electromagnet. The output
voltage is set by the supply voltage and varies in pro-
portion to the strength of the magnetic ...
The AH477 is an integrated Hall sensor with H-
bridged output driver designed for brushless DC motor
applications. The device includes an on-chip Hall sen-
sor for magnetic sensing, an amplifier that amplifies
the Hall voltage, a comparator to provide ...
The AH277A is an integrated Hall sensor with output
driver designed for electronic commutation of brush-
less DC motor applications. The device includes an on-
chip Hall sensor for magnetic sensing, an amplifier
that amplifies the Hall voltage, a Schmitt ...
The AH276 is an integrated Hall sensor with output
driver designed for electronic commutation of brush-
less DC motor applications. The device includes an on-
chip Hall sensor for magnetic sensing, an amplifier
that amplifies the Hall voltage, a Schmitt ...
The AH211 is an integrated Hall sensor with output
driver and frequency generator designed for electronic
commutation of brush-less DC motor applications. The
device includes an on-chip Hall sensor for magnetic
sensing, an amplifier that amplifies the Hall ...
The AH266 is an integrated Hall sensor with output
driver designed for electronic commutation of brush-
less DC motor applications. The device includes an on-
chip Hall sensor for magnetic sensing, an amplifier
that amplifies the Hall voltage, a Schmitt ...
The AH278 is an integrated Hall sensor with output
driver designed for electronic commutation of brush-
less DC motor applications. The device includes an on-
chip Hall sensor for magnetic sensing, an amplifier
that amplifies the Hall voltage, a Schmitt ...
The Allegro ACS712 provides economical and precise solutions
for AC or DC current sensing in industrial, commercial, and communications
systems. The device package allows for easy implementation by the customer.
Typical applications include motor control, ...
The Allegro ACS713 provides economical and precise solutions
for DC current sensing in industrial, commercial, and communications
systems. The device package allows for easy implementation by the customer.
Typical applications include motor control, load ...
The Allegro ACS754 family of current sensors provides economical
and precise solutions for current sensing in industrial, automotive,
commercial, and communications systems. The device package allows for
easy implementation by the customer. Typical ...
The bipolar Hall ICs are magnetic switches that can operate both S-and N-pole , upon which the output goes from Hi to Low.
In addition to regular single-output Hall ICs, We offers a line up of dual-output units with a reverse output terminal (active
High). ...
The BU52004GUL and BU52014HFV are bipolar Hall ICs incorporating a polarity determination circuit that enables
operation (output) on both the S- and N-poles, with the polarity judgment based on the output processing configuration.
These Hall IC products ...
The unipolar Detection Hall IC detects only either the N pole or S pole. The output turns ON (active Low) upon detection.
It is most suitable for strictly unipole detection and when lower power consumption is desired. ...
BU52040 Hall Effect IC for wheel keys / trackballs is designed to detect a switch in magnetic field from N to S (or vice versa)
and maintain its detection result on the output until the next switch. Output is pulled low for S-pole fields and high for ...
The MX887P integrated Hall-Effect switch targets
the requirements of low-power portable devices with
battery operating voltages from 2.5V to 5.5V. On-
chip power management circuitry reduces the
effective average current to just 5A at 3.0 SUPPLY. ...
The MX887D integrated Hall-Effect switch targets
the requirements of low-power portable devices with
battery operating voltages from 2.5V to 5.5V. On-
chip power management circuitry reduces the
effective average current to just 5A at 3.0 SUPPLY. ...
The MX8871P integrated Hall-Effect switch targets
battery operating voltages from 2.5V to 5.5V. On-
chip power management circuitry reduces the
effective average current to just 125A at 3.
VSUPPLY. ...
The MX8871D integrated Hall-Effect switch targets
battery operating voltages from 2.5V to 5.5V. On-
chip power management circuitry reduces the
effective average current to just 125A at 3.
VSUPPLY. ...
The APX9131 integrated circuit is an ultra-sensitive,
pole independent Hall-effect switch with a latched
digital output. 2.5 volt to 3.5 volt operation and a unique
clocking scheme reduce the average operating power
requirements. Either a north or south ...
The APX9132, integrated circuit, is an ultra-sensitive, pole
independent Hall-effect switch with a latched digital
output. A 2.5 volt to 3.5 volt operation and a unique clock-
ing scheme reduce the average operating power
requirements, either a north ...
The UTC U651 is a Integrated Hall sensor with latch
designed for electronic commutation of brushless DC
motor applications. The device includes an on-chip
Hall voltage generator for magnetic sensing, a
comparator that amplifies the Hall voltage, and a ...
The UTC H654 is integrated Hall sensors with complementary
output drivers designed for electronic commutation of brushless DC
Fan. It composed of an on-chip Hall voltage generator, a differential
amplifier, Schmitt trigger, an open-collector output on a ...
SK1812 is a semiconductor integrated circuit utilizing the Hall
effect. It has been so designed as to operate in the alternating
magnetic field especially at low supply voltage and operation over
extended temperature ranges to +125 .This Hall IC is ...
The UTC SK1816 is a semiconductor integrated circuit utilizing the
Hall effect. It designed to operate in the alternating magnetic field
especially at low supply voltage and operation over extended
temperature ranges to +125 .
This Hall IC is ...
SK1901 is a semiconductor integrated circuit utilizing the Hall effect.
It has been so designed as to operate in the alternating magnetic
field especially at low supply voltage and operation over extended
temperature ranges to +125.This Hall IC is ...
SK8552 is a semiconductor integrated circuit utilizing the Hall
effect. It has been so designed as to operate in the alternating
magnetic field especially at low supply voltage and operation over
extended temperature ranges to +125 .This Hall IC is ...
U18 is a semiconductor integrated circuit utilizing the Hall effect. It
has been so designed as to operate in the alternating magnetic field
especially at low supply voltage and operation over extended
temperature ranges to +125 .This Hall IC is suitable ...
The UTC UH276 is a Latch-Type Hall Effect sensor with built-in
complementary output drivers. The UTC UH276 is a Latch-Type Hall
Effect sensor with built-in complementary output drivers. Its designed
with internal temperature compensation circuit and ...
The UTC UH277 is a Latch-Type Hall Effect sensor with built-in
complementary output drivers. Its designed with internal temperature
compensation circuit and built-in protection diode prevent reverse
power fault. The application is aimed for brush-less DC ...
SK8509 is a semiconductor integrated circuit utilizing the Hall
effect. It has been so designed as to operate in the accurately track
extremely small changes in magnetic flux density-changes generally
too small to operate Hall-effect switches. This Hall ...
The APX9140 is an integrated Hall Effect Sensor IC
designed for electric commutation of DC brushless
motor applications. The APX9140 still can operate at
as low as 3 volts. The APX9140 is available in low
cost TO -92M package with 3 different ...
