• Product pinout
  • Description
  • TPA152,75-mW Stereo Audio Power Amplifier
  • The TPA152 is a stereo audio power amplifier capable of less than 0.1% THD+N at 1 kHz when delivering 75 mW per channel into a 32- load. THD+N is less than 0.2% across the audio band of 20 to 20 kHz. For 10 k loads, the THD+N performance is better than 0.005% ...
  • TPA4411,80-mW DirectPath(TM) Stereo Headphone Driver
  • The TPA4411 and TPA4411M are stereo Headphone drivers designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The TPA4411 and TPA4411M are ideal for small portable electronics where size and cost are critical ...
  • TPA6110A2,TPA6110A2: 150-mW Stereo Audio Power Amplifier
  • The TPA6110A2 is a stereo audio power amplifier packaged in an 8-pin PowerPADTM MSOP package capable of delivering 150 mW of continuous RMS power per channel into 16- loads. Amplifier gain is externally configured by means of two resistors per input channel ...
  • TPA6111A2,TPA6111A2: 150-mW Stereo Audio Power Amplifier
  • The TPA6111A2 is a stereo audio power amplifier packaged in either an 8-pin SOIC or an 8-pin PowerPAD?? MSOP package capable of delivering 150 mW of continuous RMS power per channel into 16- loads. Amplifier gain is externally configured by means of two ...
  • TPA6112A2,TPA6112A2: 150-mW Stereo Audio Power Amplifier
  • The TPA6112A2 is a stereo audio power amplifier with differential inputs packaged in a 10-pin PowerPAD MSOP package capable of delivering 150 mW of continuous RMS power per channel into 16- loads. Amplifier gain is externally configured by means of two ...
  • TPA6120A2,High Fidelity Headphone Amplifer
  • The TPA6120A2 is a high fidelity audio amplifier built on a current-feedback architecture. This high bandwidth, extremely low noise device is ideal for high performance equipment. The better than 120 dB of dynamic range exceeds the capabilities of the human ...
  • BUF634,250mA High-Speed Buffer
  • The BUF634 is a high speed unity-gain open-loop buffer recommended for a wide range of applications. It can be used inside the feedback loop of op amps to increase output current, eliminate thermal feedback and improve capacitive load drive. For low power ...
  • LM4808,LM4808 Dual 105 MW Headphone Amplifier
  • The LM4808 is a dual audio power amplifier capable of delivering 105mW per channel of continuous average power into a 16 load with 0.1% (THD+N) from a 5V power supply.
    Boomer audio power amplifiers were designed specifically to provide high quality output ...
  • LM4912,LM4912 Stereo 40mW Low Noise Headphone Amplifier
  • The LM4912 is an stereo audio power amplifier capable of delivering 40mW per channel of continuous average power into a 16 load or 25mW per channel into a 32 load at 1% THD form a 3V power supply.
    Boomer audio power amplifiers were designed specifically ...
  • LM4913,2W Monaural, 90mW Stereo Headphone Audio Amplifier
  • The unity-gain stable LM4913 is both a mono differential output (for bridge-tied loads, or BTL) audio power amplifier and a single-ended (SE) stereo Headphone amplifier. Operating on a single 5V supply, the mono BTL mode delivers 2W (typ) to a 4 load (Note 1) ...
  • LM4863,Dual 2.2W Audio Amplifier Plus Stereo Headphone Function
  • The LM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4 load or 2.5W to a 3 load with less than 1.0% THD+N. In addition, the Headphone input pin allows the amplifiers to operate in single-ended ...
  • LM4873,Dual 2.1W Audio Amplifier Plus Stereo Headphone Function
  • The LM4873 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.1W to a 4 load or 2.4W to a 3 load with less than 1.0% THD+N. In addition, the Headphone input pin allows the amplifiers to operate in single-ended ...
  • LM4883,Dual 2.1W Audio Amplifier Plus Stereo Headphone Function
  • The LM4883 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.1W to a 4 load or 2.4W to a 3 load with less than 1.0% THD+N. In addition, the Headphone input pin allows the amplifiers to operate in single-ended ...
  • TDA8559,TDA8559T Low-voltage Stereo Headphone Amplifier
  • The TDA8559T is a stereo amplifier that operates over a wide supply voltage range from 1.9 V to 30 V and consumes a very low quiescent current. This makes it suitable for battery fed applications (2 x 1.5 V cells). Because of an internal voltage buffer, this ...
  • TDA1308,TDA1308; TDA1308A Class-AB Stereo Headphone Driver
  • The TDA1308; TDA1308A is an integrated class-AB stereo Headphone driver contained in an SO8, DIP8 or a TSSOP8 plastic package. The TDA1308AUK is available in an 8 bump wafer level chip-size package (WLCSP8). The device is fabricated in a 1 um Complementary ...
  • TS482,100mW Stereo Headphone Amplifier
  • The TS482 is a dual audio power amplifier able to drive a 16 or 32, stereo headset down to low voltages. It is delivering up to 100mW per channel (into 16, loads) of continuous average power with 0.1% THD+N from a 5V power supply. The unity gain stable ...
  • TS4855,Loudspeaker And Headset Driver With Volume Control
  • The TS4855 is a complete low power audio amplifier solution targeted at mobile phones. It integrates, into an extremely compact flip-chip package, an audio amplifier, a speaker driver, and a headset driver. The Audio Power Amplifier can deliver 1.1 ...
  • TS488,Pop-free 100mW Stereo Headphone Amplifier
  • The TS488, ts489 is an enhancement of TS486/TS487 that eliminates pop and click noise and reduces the number of external passive components. The TS488, ts489 is a dual audio power amplifier capable of driving, in single-ended mode, either a 16,or ...
  • TA2145AFG,3 V Stereo Headphone Amplifier
  • The TA2145AFG is developed for play-back stereo Headphone equipments (3 V USE). It is built in dual preamplifiers, dual OCL power amplifiers, motor governor, DC volume control and preamplifier on/off switch etc. ...
  • TB2173FTG,2-Source Stereo Headphone Amplifier
  • The TB2173FTG is a stereo Headphone amplifier IC that can accept two sources, developed for portable audio systems. It is particularly ideal for digital portable audio systems having built-in tuners. ...
  • HT82V736,HT82V736 -- Stereo Headphone Driver With Mute
  • The HT82V736 is a class AB stereo earphone driver designed for portable digital audio application. It provides an integrated mute function to prevent popping sounds when power is turned on and off. In addition, the HT82V736 further integrates a voltage ...
  • NJM2768B,HEADPHONE AMPLIFIER For CD-ROM
  • The NJM2768B is a Headphone amplifier designed for CD-ROM. It includes 0dB closed loop gain and mute circuitrequires few external component. The NJM2768B realizes very low turn-noise at mute mode. It is suitable for CD-ROMand other general audio headphone ...
  • NJM2769A,HAEDPHONE AMPLIFIER For CD-ROM
  • The NJM2769A is a Headphone amplifier designed for CDROM. It includes 6dB closed loop gain and mute circuit which require few external component. The NJM2769A realizes very low turn-noise at mute mode. It is suitable for CD-ROMand other general audio headphone ...
  • NJM2769B,HEADPHONE AMPLIFIER For CD-ROM
  • The NJM2769B is a Headphone amplifier designed for CD-ROM. It includes 6dB closed loop gain and mute circuitrequires few external component. The NJM2769B realizes very low turn-noise at mute mode. It is suitable for CD-ROMand other general audio headphone ...
  • NJM2770,HIGH-POWER & LOW-VOLTAGE AUDIO POWER AMPLIFIER
  • The NJM2770 is high-power and low-voltage audio power amplifier with standby function. No external coupling capacitors required because of the differential output type. Two external resistors adjust the closed loop gain. The output power is 250mW typical at ...
  • NJM2772,LOW-VOLTAGE HEADPHONE AMPLIFIER For PORTABLE-AUDIO
  • The NJM2772 is a low voltage Headphone amplifier for portable audio. The NJM2772 includes mute circuitcenter amplifier and beep inputreduce the external partsstandby circuit and center amplifier with ON/OFFapplies to low current consumption. The mute function ...
  • NJM2776,Headphone Amplifier For Portable Audio
  • The NJM2776 is a low voltage Headphone amplifier for portable audio applications. The NJM2776 operates directly for one battery supply with independent power supply terminals (V+1 and V+2). Also it provides shock-noise less standby mode. The NJM2776 is ...
  • NJM2777,Headphone Amplifier With Electronic Volume
  • NJM2777 is a Headphone amplifier with electronic volume. It includes widely gain adjustable volume+20 to -80 dBand mute function. These are controlled by DC voltage. The NJM2777 is suitable for Headphone output on TV set.
    ...
  • SC1308L,2-CH HEADPHONE AMPLIFIER
  • The SC1308L is a Class AB stereo Headphone driver chip utilizing CMOS Technology specially designed for portable digital audio applications. It is housed in an 8-pin DIP or SO package and is functionally compatible with ...
  • SC4808,STEREO HEADPHONE AMPLIFIER
  • SC4808 is a class AB stereo power amplifier utilizing CMOS technology. Since providing high quality output with a minimal amount of external components, SC4808 is suited for low-power portable equipments. ...
  • SC7422,2-CH AUDIO POWER AMPLIFIER
  • The SC7422 is a class AB power amplifier which designed for dual audio purpose. It can deliver 2W 2 power output to the 4 load in the 5V operation voltage. Total harmonic distortion is lower than 0.03%. The output mode can be switched ...