• Product pinout
  • Description
  • THS3112,Low-Noise, High-Speed 150 MA Current Feedback Amplifiers
  • The THS3112/5 are low-noise, high-speed current feedback amplifiers, ideal for any application requiring high output current. The low noninverting current noise of 2.9 pA/Hz and the low inverting current noise of 10.8 pA/Hz increase signal to noise ratios for ...
  • THS3115,Low-Noise, High-Speed 150 MA Current Feedback Amplifiers
  • The THS3112/5 are low-noise, high-speed current feedback amplifiers, ideal for any application requiring high output current. The low noninverting current noise of 2.9 pA/Hz and the low inverting current noise of 10.8 pA/Hz increase signal to noise ratios for ...
  • OPA541,High Power Monolithic Operational Amplifier
  • The OPA541 is a power operational amplifier capable of operation from power supplies up to 40V and delivering continuous output currents up to 5A. Internal current limit circuitry can be user-programmed with a single external resistor, protecting the amplifier ...
  • OPA548,OPA548: High-Voltage, High-Current Operational Amplifier
  • The OPA548 is a low-cost, high-voltage/high-current operational amplifier ideal for driving a wide variety of loads. A laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current. The OPA548 ...
  • OPA567,Rail-to-Rail I/O, 2A Power Amplifier
  • The OPA567 is a low-cost, high-current, operational amplifier designed for driving a wide variety of loads while operating on low-voltage supplies. It operates from either single or dual supplies for design flexibility and has rail-to-rail swing on the input ...
  • OPA547,High-Voltage, High-Current Operational Amplifier
  • The OPA547 is a low-cost, high-voltage/high-current operational amplifier ideal for driving a wide variety of loads. A laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current. The OPA547 ...
  • OPA544,High-Voltage, High-Current Operational Amplifier
  • The OPA544 is a high-voltage/high-current operational amplifier suitable for driving a wide variety of high power loads. High performance FET op amp circuitry and high power output stage are combined on a single monolithic chip. The OPA544 is protected by ...
  • OPA549,High-Voltage, High-Current Operational Amplifier
  • The OPA549 is a low-cost, high-voltage/high-current operational amplifier ideal for driving a wide variety of loads. This laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current. The ...
  • OPA561,High-Current, High-Speed Operational Amplifier
  • The OPA561 is a low-cost, high-current operational amplifier capable of driving up to 1.2A pulses into reactive loads. This monolithic integrated circuit provides high reliability in demanding line-carrier communications, laser diode drivers, and motor control ...
  • TLE2062AM,Excalibur JFET-Input High-Output-Drive UPower Op Amps
  • The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise ...
  • TLE2062,Excalibur JFET-Input High-Output-Drive UPower Op Amps
  • The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise ...
  • OPA2544,High-Voltage, High-Current Dual Operational Amplifier
  • The OPA2544 is a dual high-voltage/high-current operational amplifier suitable for driving a wide variety of high power loads. It provides 2A output current and power supply voltage range extends to 35V. The OPA2544 integrates two high performance FET op ...
  • TL3414A,Dual High Output Current Operational Amplifier
  • The TL3414A device is a dual operational amplifier that can be operated with single or dual power supplies. In addition to high gain and high output voltage swing, it is capable of driving a 70-mA load, making it ideally suited for simple, low-cost ...
  • TL4581,Dual Low-Noise High-Drive Operational Amplifier
  • The TL4581 is a dual operational amplifier that has been designed optimally for audio applications, such as improving tone control. It offers low noise, high-gain bandwidth, good slew, and high output current drive for driving capacitive loads. These features ...
  • LM12CL,80W Operational Amplifier
  • The LM12 is a power op amp LM12CL capable of driving 25V at 10A while operating from 30V supplies. The monolithic IC can deliver 80W of sine wave power into a 4 load with 0.01% distortion. Power bandwidth is 60 kHz. Further, a peak dissipation capability of ...
  • LM3886,High-Performance 68W Audio Power Amplifier With Mute
  • The LM3886 is a high-performance audio power amplifier capable of delivering 68W of continuous average power to a 4 load and 38W into 8 with 0.1% THD+N from 20Hz-20kHz.
    The performance of the LM3886, utilizing its Self Peak Instantaneous Temperature (Ke) ...
  • LM3875,High-Performance 56W Audio Power Amplifier
  • The LM3875 is a high-performance audio power amplifier capable of delivering 56W of continuous average power to an 8 load with 0.1% THD+N from 20Hz to 20kHz.
    The performance of the LM3875, utilizing its Self Peak Instantaneous Temperature (Ke) (SPiKe?) ...
  • LM1875,20-W Audio Power Amplifier
  • The LM1875 is a monolithic power amplifier offering very low distortion and high quality performance for consumer audio applications.
    The LM1875 delivers 20 watts into a 4 or 8 load on 25V supplies. Using an 8 load and 30V supplies, over 30 watts of power ...
  • LM675,Power Operational Amplifier
  • The LM675 is a monolithic power operational amplifier featuring wide bandwidth and low input offset voltage, making it equally suitable for AC and DC applications.
    The LM675 is capable of delivering output currents in excess of 3 amps, operating at supply ...
  • LM1877,Dual Audio Power Amplifier
  • The LM1877 is a monolithic dual power amplifier designed to deliver 2W/channel continuous into 8 loads. The LM1877 is designed to operate with a low number of external components, and still provide flexibility for use in stereo phonographs, tape recorders and ...
  • LMH6672,Dual, High Output Current, High Speed Op Amp
  • The LMH6672 is a low cost, dual high speed op amp capable of driving signals to within 1V of the power supply rails. It features the high output drive with low distortion required for the demanding application of a single supply xDSL line driver.
    When ...
  • AD8397,Rail-to-Rail, High Output Current Amplifier
  • The AD8397 has two voltage feedback operational amplifiers capable of driving heavy loads with excellent linearity. The common-emitter, rail-to-rail output stage surpasses the output voltage capability of typical emitter-follower output stages and can swing ...
  • AD8016,Full Rate ADSL Line Driver With Powerdown
  • The AD8016 is a 2nd generation DSL line driver capable of delivering full rate ADSL from the Central Office on a cool 1.5 W total power dissipation. With the addition of a flexible Standby functionality, and packaged in a 20-Lead PSOP, a 24-Lead SOIC, and a ...
  • AD8023,High Current Output, Triple Video Amplifier
  • The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature ...
  • OP179,Rail-to-Rail High Output Current Operational Amplifier
  • The OP179 and OP279 are rail-to-rail, high output current, single-supply amplifiers. They are designed for low voltage applications that require either current or capacitive load drive capability. The OP179/OP279 can sink and source currents of 60 mA ...
  • OP279,Rail-to-Rail High Output Current Operational Amplifier
  • The OP279 is a dual rail-to-rail, high output current, single supply amplifier. It is designed for low voltage applications that require either current or capacitive load drive capability. The OP279 can sink and source currents of 80 mA (typ) and is stable ...
  • AD8010,Low Power, High Current Distribution Amplifier
  • The AD8010 is a low power, high current amplifier capable of delivering a minimum load drive of 175 mA. Signal performanc such as 0.02% and 0.03?differential gain and phase error is maintained while driving eight 75 back terminated video lines ? The ...
  • AD815,High Output Current Differential Driver
  • The AD815 consists of two high speed amplifiers capable of supplying a minimum of 500 mA. They are typically configured as a differential driver enabling an output signal of 40 V p-p on 15 V supplies. This can be increased further with the use of a coupling ...