• Product pinout
  • Description
  • UCC2912,Programmable Hot Swap Switch Power Manager
  • The UCC3912 family of Hot Swap power managers provides complete power management, Hot Swap capability, and circuit breaker functions. The only component required to operate the device, other than supply bypassing, is the fault timing capacitor, CT. All control ...
  • TPS2350,Hot Swap Power Manager For Redundant -48V Supplies
  • The TPS2350 is a Hot Swap power manager optimized for replacing OR-ing diodes in redundant power ?48-V systems. The TPS2350 operates with supply voltages from ?12 V to ?80 V, and withstands spikes to ?100 V.
    The TPS2350 uses two power FETs as low ...
  • TPS2390,Simple -48V Hot Swap Controller
  • The TPS2390 and TPS2391 integrated circuits are Hot Swap power managers optimized for use in nominal ?48-V systems. They are designed for supply voltage ranges up to ?80 V, and are rated to withstand spikes to ?100 V. In conjunction with an external N-channel ...
  • TPS2391,Simple -48V Hot Swap Controller
  • The TPS2390 and TPS2391 integrated circuits are Hot Swap power managers optimized for use in nominal ?48-V systems. They are designed for supply voltage ranges up to ?80 V, and are rated to withstand spikes to ?100 V. In conjunction with an external N-channel ...
  • TPS2398,-48V Hot Swap Controller
  • The TPS2398 and TPS2399 integrated circuits are Hot Swap power managers optimized for use in nominal ?48-V systems. For redundant-supply systems, they incorporate an improved circuit breaker response that provides rapid protection from short circuits, while ...
  • TPS2399,Simple -48V Hot Swap Controller With Enable
  • The TPS2398 and TPS2399 integrated circuits are Hot Swap power managers optimized for use in nominal ?48-V systems. For redundant-supply systems, they incorporate an improved circuit breaker response that provides rapid protection from short circuits, while ...
  • TPS2400,Overvoltage/Undervoltage Protection IC In SOT-23-5
  • The TPS2400 overvoltage protection controller is used with an external N-channel MOSFET to isolate sensitive electronics from destructive voltage spikes and surges. It is specifically designed to prevent large voltage transients associated with automotive ...
  • TPS2410,N+1 And OR-ing Power Rail Controller
  • The TPS2410/11 controller, in conjunction with an external N-channel MOSFET, emulates the function of a low forward-voltage diode. The TPS2410/11 can be used to combine multiple power supplies to a common bus in an N+1 configuration, or to combine redundant ...
  • TPS2411,N+1 And OR-ing Power Rail Controller
  • The TPS2410/11 controller, in conjunction with an external N-channel MOSFET, emulates the function of a low forward-voltage diode. The TPS2410/11 can be used to combine multiple power supplies to a common bus in an N+1 configuration, or to combine redundant ...
  • TPS2412,N+1 And OR-ing Power Rail Controller
  • The TPS2412/13 controller, in conjunction with an external N-channel MOSFET, emulates the function of a low forward voltage diode. The TPS2412/13 can be used to combine multiple power supplies to a common bus in an N+1 configuration, or to combine redundant ...
  • TPS2413,N+1 And OR-ing Power Rail Controller
  • The TPS2412/13 controller, in conjunction with an external N-channel MOSFET, emulates the function of a low forward voltage diode. The TPS2412/13 can be used to combine multiple power supplies to a common bus in an N+1 configuration, or to combine redundant ...
  • UC2914,5-35V Single, Hot-Swap IC Industrial Temperature Range
  • The UC3914 family of Hot Swap power managers provides complete power management, Hot Swap and fault handling capability. Integrating this part and a few external components, allows a board to be swapped in or out upon failure or system modification without ...
  • UC3914,5-35V Single, Hot-Swap IC Commercial Temperature Range
  • The UC3914 family of Hot Swap power managers provides complete power management, Hot Swap and fault handling capability. Integrating this part and a few external components, allows a board to be swapped in or out upon failure or system modification without ...
  • UCC2919,3-8V Single, Hot-Swap IC Industrial Temp.
  • The UCC3919 family of Hot Swap power managers provide complete power management, Hot Swap and fault handling capability. The UCC3919 features a duty ratio current limiting technique, which provides peak load capability while limiting the average power ...
  • UCC3913,Negative Floating Single, Hot-Swap IC Commercial Temp.
  • The UCCx913 family of negative voltage circuit breakers provides complete power management, hot-swap, and fault handling capability. The device is referenced to the negative input voltage and is driven through an external resistor connected to ground, which is ...
  • UCC3917,Positive Floating Single, Hot-Swap IC Commercial Temp.
  • The UCCx917 family of positive-floating hot-swap managers provides complete power management, hot-swap, and fault handling capability. The voltage limitation of the application is only restricted by the external component voltage limitations. The IC provides ...
  • UCC3919,3-8V Single, Hot-Swap IC Commercial Temp.
  • The UCC3919 family of Hot Swap power managers provide complete power management, Hot Swap and fault handling capability. The UCC3919 features a duty ratio current limiting technique, which provides peak load capability while limiting the average power ...
  • LM5068,Negative Voltage Hot Swap Controller
  • The LM5068 hot-swap controller provides intelligent control of power supply connections during the insertion and removal of circuit cards powered by live system backplanes.
    The LM5068 provides both in-rush current control and short-circuit protection ...
  • ADM1170,1.6 V To 16.5 V Hot Swap Controller
  • The ADM1170 is a Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. This is achieved using a pass FET with a current control loop that monitors the input current using a sense resistor. An internal charge pump ...
  • ADM1176,Hot Swap Controller And I2C® Power Monitor
  • The ADM1176 is an integrated Hot Swap controller that offers digital current and voltage monitoring via an on-chip, 12-bit analog-to-digital converter (ADC), communicated through an I2C interface.
    An internal current sense amplifier senses voltage ...
  • ADM4210,Low Voltage Hot Swap Controller In 6-pin TSOT Package
  • The ADM4210 is a 6-pin TSOT Hot Swap controller that allows a board to be safely inserted and removed from a live backplane.
    An internal charge pumped driver controls the GATE of an external high side N-channel FET for a supply voltage ranging from 2.7V ...
  • ADM1073,-48 V Full Feature Hot Swap Controller
  • The ADM1073 is a full feature negative voltage Hot Swap controller that allows boards to be safely inserted and removed from a live -48V backplane. The part provides precise robust current limiting, protection against transient and non-transient short circuits ...
  • ISL6121,Single Supply Integrated Current Limiting Controller
  • The ISL6121 is a single supply Overcurrent (OC) fault protection IC for 2.5V to 5V applications where 2A current limiting is desired. This device features internal current monitoring and limiting along with a 50m integrated power switch and a current limited ...
  • ISL6115,Power Distribution Controllers
  • This family of fully featured Hot Swap power controllers targets applications in the +2.5V to +12V range. The ISL6115 is for +12V control, the ISL6116 for +5V, the ISL6117 for +3.3V and the ISL6120 for +2.5V control applications. Each has a hard wired ...
  • ISL6116,Power Distribution Controllers
  • This family of fully featured Hot Swap power controllers targets applications in the +2.5V to +12V range. The ISL6115 is for +12V control, the ISL6116 for +5V, the ISL6117 for +3.3V and the ISL6120 for +2.5V control applications. Each has a hard wired ...
  • ISL6117,Power Distribution Controllers
  • This family of fully featured Hot Swap power controllers targets applications in the +2.5V to +12V range. The ISL6115 is for +12V control, the ISL6116 for +5V, the ISL6117 for +3.3V and the ISL6120 for +2.5V control applications. Each has a hard wired ...
  • ISL6120,Power Distribution Controllers
  • This family of fully featured Hot Swap power controllers targets applications in the +2.5V to +12V range. The ISL6115 is for +12V control, the ISL6116 for +5V, the ISL6117 for +3.3V and the ISL6120 for +2.5V control applications. Each has a hard wired ...
  • ISL6140,Negative Voltage Hot Plug Controller
  • The ISL6140 is an 8-pin, negative voltage hot plug controller that allows a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • ISL6141,Negative Voltage Hot Plug Controller
  • The ISL6141 is an 8-pin, negative voltage hot plug controller that allows a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • ISL6142,Negative Voltage Hot Plug Controller
  • The ISL6142/52 are 14 pin, negative voltage hot plug controllers that allow a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel ...
  • ISL6150,Negative Voltage Hot Plug Controller
  • The ISL6140 is an 8-pin, negative voltage hot plug controller that allows a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • ISL6151,Negative Voltage Hot Plug Controller
  • The ISL6141, ISL6151 is an 8-pin, negative voltage hot plug controller that allows a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • ISL6152,Negative Voltage Hot Plug Controller
  • The ISL6142,ISL6152 are 14 pin, negative voltage hot plug controllers that allow a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel ...
  • ISL6119,USB Dual Port Power Supply Controller
  • The ISL6119 is a USB dual port power controller, fully independent overcurrent (OC) fault protection IC. Operational over the +2.5V to +5.5V range, this device features internal current monitoring, accurate current limiting, integrated power switches and ...
  • HIP1012A,Dual Power Distribution Controller
  • The HIP1012A is a Hot Swap dual supply power distribution controller. Two external N-Channel MOSFETs are driven to distribute power while providing load fault isolation. At turn-on, the gate of each external N-Channel MOSFET is charged with a 10A current ...
  • HIP1013,Low Cost Dual Power Distribution Controller
  • The HIP1013 is a low cost Hot Swap dual supply power distribution controller. Two external N-Channel MOSFETs are driven to distribute power while providing load fault isolation. At turn-on, the gate of each external N-Channel MOSFET is charged with a 10A ...
  • ISL6161,Dual Power Distribution Controller
  • The ISL6161 is a Hot Swap dual supply power distribution controller that can be used in PCI-Express applications.
    Two external N-Channel MOSFETs are driven to distribute and control power while providing load fault isolation. At turnon, the gate of each ...
  • ISL6173,Dual Low Voltage Hot Swap Controller
  • This IC targets dual voltage Hot Swap applications across the +2.5V to +3.3V (nominal) bias supply voltage range with a second lower voltage rail down to less than 1V. It features a charge pump for driving external N-Channel MOSFETs, regulated current ...
  • ISL6112,Dual Slot PCI-Express Power Controller
  • The ISL6112 targets the PCI-Express add-in card hot plug application. Together with two each of N-Channel and P-Channel MOSFETs, four current sense resistors and several external passive components the ISL6112 provides a compliant hot plug power control ...
  • ISL6113,Dual Slot PCI-E Hot Plug Controllers
  • The ISL6113, ISL6114 both target the PCI-Express Add-in card Hot Swap application. Together with a pair of N-Channel and P-Channel MOSFETs, and two sense resistors per slot, either provides compliant hot plug power control to any combination of two PCI-Express ...
  • ISL6114,Dual Slot PCI-E Hot Plug Controllers
  • The ISL6113, ISL6114 both target the PCI-Express Add-in card Hot Swap application. Together with a pair of N-Channel and P-Channel MOSFETs, and two sense resistors per slot, either provides compliant hot plug power control to any combination of two PCI-Express ...
  • MCP18480,-48V Hot Swap Controller
  • MCP18480 The MCP18480 is a Hot Swap controller that allows boards to be safely removed or inserted from an active backplane using -48V. When PCBs are inserted into a live backplane, high- peak or transient currents from the source are gener- ated due to ...
  • LTC4350,LTC4350 - Hot Swappable Load Share Controller
  • The LTC4350 is a load share controller that allows systems to equally load multiple power supplies connected in parallel. The output voltage of each supply is adjusted using the SENSE+ input until all currents match the share bus. The LTC4350 also isolates ...
  • LT1640AH,LT1640AH - Negative Voltage Hot Swap Controller
  • The LT1640AL/LT1640AH are 8-pin, negative voltage Hot Swap controllers that allow a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • LT1640AL,LT1640AL - Negative Voltage Hot Swap Controller
  • The LT1640AL/LT1640AH are 8-pin, negative voltage Hot Swap controllers that allow a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • LT1640H,LT1640H - Negative Voltage Hot Swap Controller
  • The LT1640L/LT1640H is an 8-pin, negative voltage Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • LT1640L,LT1640L - Negative Voltage Hot Swap Controller
  • The LT1640L/LT1640H is an 8-pin, negative voltage Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • LT1641-1,LT1641-1 - Positive High Voltage Hot Swap Controllers
  • The LT1641-1/LT1641-2 are 8-pin Hot Swap controllers that allow a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, the board supply voltage can be ramped up at a programmable rate. A high side switch ...
  • LT1641-2,LT1641-2 - Positive High Voltage Hot Swap Controllers
  • The LT1641-1/LT1641-2 are 8-pin Hot Swap controllers that allow a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, the board supply voltage can be ramped up at a programmable rate. A high side switch ...
  • LT4220,LT4220 - Dual Supply Hot Swap Controller
  • The LT4220 16-pin dual voltage Hot Swap controller allows a board to be safely inserted and removed from a live backplane. The device operates with any combination of 2.7V to 16.5V and 2.7V to 16.5V supplies. Using two external N-channel pass transistors, the ...
  • LT4250H,LT4250H - Negative 48V Hot Swap Controller
  • The LT4250L/LT4250H are 8-pin, negative 48V HotSwapTM controllers that allow a board to be safely inserted and removed from alive backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • LT4250L,LT4250L - Negative 48V Hot Swap Controller
  • The LT4250L/LT4250H are 8-pin, negative 48V HotSwapTM controllers that allow a board to be safely inserted and removed from alive backplane. Inrush current is limited to a programmable value by controlling the gate voltage of an external N-channel pass ...
  • LT4256-1,LT4256-1 - Positive High Voltage Hot Swap Controllers
  • The LT4256-1/LT4256-2 are high voltage Hot Swap controllers that allow a board to be safely inserted and removed from a live backplane. An internal driver drives an external N-channel MOSFET switch to control supply voltages ranging from 10.8V to 80V.
    The ...
  • LT4256-2,LT4256-2 - Positive High Voltage Hot Swap Controllers
  • The LT4256-1/LT4256-2 are high voltage Hot Swap controllers that allow a board to be safely inserted and removed from a live backplane. An internal driver drives an external N-channel MOSFET switch to control supply voltages ranging from 10.8V to 80V.
    The ...
  • LTC1421,LTC1421 - Hot Swap Controller
  • The LTC1421/LTC1421-2.5 are Hot Swap controllers that allow a board to be safely inserted and removed from a live backplane. Using external N-channel pass transistors, the board supply voltages can be ramped up at a programmable rate. Two high side switch ...
  • LTC1421-2.5,LTC1421-2.5 - Hot Swap Controller
  • The LTC1421/LTC1421-2.5 are Hot Swap controllers that allow a board to be safely inserted and removed from a live backplane. Using external N-channel pass transistors, the board supply voltages can be ramped up at a programmable rate. Two high side switch ...
  • LTC1422,LTC1422 - Hot Swap Controller
  • The LTC1422 is an 8-pin Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. Using an external N-channel pass transistor, the board supply voltage can be ramped up at a programmable rate. A high side switch driver ...
  • LTC1642,LTC1642 - Hot Swap Controller
  • The LTC1642 is a 16-pin Hot SwapTM controller that allows a board to be safely inserted and removed from a live backplane. Using an external N-Channel pass transistor, the board supply voltage can be ramped up at an adjustable rate. A high side switch driver ...
  • LTC1642A,LTC1642A - Hot Swap Controller
  • The LTC1642A is a 16-pin Hot SwapTM controller that allows a board to be safely inserted and removed from a live backplane. Using an external N-Channel pass transistor, the board supply voltage can be ramped up at an adjustable rate. A high side switch driver ...
  • LTC1643A,LTC1643A - PCI-Bus Hot Swap Controller
  • The LTC1643A is a Hot Swap controller that allows a board to be safely inserted and removed from a live PCI-Bus slot. Two external N-channel transistors control the 3.3V and 5V supplies while on-chip switches control the 12V and 12V supplies. All supply ...
  • LTC1644,LTC1644 - CompactPCI Bus Hot Swap Controller
  • The LTC1644 is a Hot Swap controller that allows a board to be safely inserted and removed from a CompactPCI bus slot. External N-channel transistors control the 3.3V/5V supplies, while on-chip switches control the 12V and 12V supplies. The 3.3V and 5V ...
  • LTC1646,LTC1646 - CompactPCI Dual Hot Swap Controller
  • The LTC1646 is a Hot Swap controller that allows a board to be safely inserted and removed from a live CompactPCI bus slot. Two external N-Channel transistors control the 3.3V and 5V supplies. The supplies can be ramped-up in current limit or at a programmable ...
  • LTC1647-1,LTC1647-1 - Dual Hot Swap Controllers
  • The LTC1647-1/LTC1647-2/LTC1647-3 are dual Hot Swap controllers that permit a board to be safely inserted and removed from a live backplane. Using external N-channel MOSFETs, the board supply voltages can be ramped up at a programmable rate. A high side ...
  • LTC1647-2,LTC1647-2 - Dual Hot Swap Controllers
  • The LTC1647-1/LTC1647-2/LTC1647-3 are dual Hot Swap controllers that permit a board to be safely inserted and removed from a live backplane. Using external N-channel MOSFETs, the board supply voltages can be ramped up at a programmable rate. A high side ...