3.3-V 10Base-T/100Base-TX Integrated PHYceiver

The ICS1893AF is a lower cost, re-packaged version of the ICS1893Y-10. The ICS1893AF is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AF uses the same proven silicon as the ICS1893Y-10 but offers a lower cost solution by using a lower cost 300 mil. 48-lead SSOP package. The ICS1893AF uses the same twisted-pair transmit and receive circuits as the ICS1893Y-10 and the same recommended board layout techniques apply to the ICS1893AF. The ICS1893AF is intended for Node applications using the standard MII Interface to the MAC Single 3.3V power supply Supports category 5 cables with attenuation in excess of 24dB at 100 MHz. DSP-based baseline wander correction to virtually eliminate killer packets Low-power, 0.35-micron CMOS (typically 400 mW) Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sublayers of IEEE standard 10Base-T and 100Base-TX IEEE 802.3 compliant Clock or crystal supported Media Independent Interface (MII) supported Managed or Unmanaged Applications 10M or 100M Half and Full Duplex Modes Auto-Negotiation with Parallel detection for Legacy products Fully integrated, DSP-based PMD includes: Adaptive equalization and baseline wander correction Transmit wave shaping and stream cipher scrambler MLT-3 encoder and NRZ/NRZI encoder Loopback mode for Diagnostic Functions Small footprint 48-pin 300 mil SSOP package. Available in Industrial Temperature and Lead Free packaging. By Integrated Device Technology
ICS1893A 's PackagesICS1893A 's pdf datasheet

ICS1893A Pinout will be updated soon..., now you can download the pdf datasheet to check the pinouts !
ICS1893A circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

ICS1893A Pb-Free ICS1893A Cross Reference ICS1893A Schematic ICS1893A Distributor
ICS1893A Application Notes ICS1893A RoHS ICS1893A Circuits ICS1893A footprint