Low Cost 27 MHz 3.3 Volt VCXO

The ICS722 is a low cost, low-jitter, high-performance 3.3 volt VCXO designed to replace expensive Discrete VCXOs modules. The on-chip Voltage Controlled Crystal Oscillator accepts a 0 to 3.3 V input voltage to cause the output Clocks to vary by over 100 ppm. Using IDTs patented VCXO techniques, the device uses an inexpensive external pullable crystal in the range of 16.2 to 28 MHz to produce a VCXO output Clock at that same frequency. The frequency of the on-chip VCXO is adjusted by an external control voltage input into pin VIN. Because VIN is a high impedance input, it CAN be driven directly from an PWM RC integrator circuit. Frequency output increases with VIN voltage input. The usable range of VIN is 0 to 3.3 V. Packaged in 8-pin SOIC Operational frequency range of 16.2 MHz to 28 MHz Uses an inexpensive external crystal On-chip patented VCXO with pull range of 230 ppm (minimum) VCXO tuning voltage of 0 to 3.3 V Operating voltage of 3.3 V 12 mA output drive capability at TTL levels Advanced, low-power, sub-micron CMOS process By Integrated Device Technology
ICS722 's PackagesICS722 's pdf datasheet

ICS722 Pinout, Pinouts
ICS722 pinout,Pin out
This is one package pinout of ICS722,If you need more pinouts please download ICS722's pdf datasheet.

ICS722 Application circuits
ICS722 circuits
This is one application circuit of ICS722,If you need more circuits,please download ICS722's pdf datasheet.

Related Electronics Part Number

Related Keywords:

ICS722 Pb-Free ICS722 Cross Reference ICS722 Schematic ICS722 Distributor
ICS722 Application Notes ICS722 RoHS ICS722 Circuits ICS722 footprint