3.3V Zero Delay Clock Multiplier, Spread Spectrum Compatible

The IDT23S08E is a high-speed phase-lock loop (PLL) Clock multiplier. It is designed to address high-speed Clock Distribution and multiplication applica- tions. The zero delay is achieved by aligning the phase between the incoming Clock and the output Clock operable within the range of 10 to 200MHz. The IDT23S08E has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks CAN be put in tri-state mode. In test mode, the PLL is turned off, and the input Clock directly drives the outputs for system testing purposes. In the absence of an input Clock the IDT23S08E enters power down. In this mode, the device will draw less than 12A for Commercial Temperature range and less than 25, for Industrial temperature range, and the outputs are tri-stated. By Integrated Device Technology