Octal 3-State Bus Transceivers And D Flip-Flops

The IN74ACT652 is identical in pinout to the LS/ALS652, HC/HCT652. The IN74ACT652 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. These devices consists of Bus Transceiver circuits, D-type flip- flop, and control circuitry arranged for multiplex transmission of data directly from the data bus or from the internal storage Registers Direction and Output Enable are provided to select the read-time or stored data function. Data on the A or B Data bus, or both, CAN be stored in the internal D Flip-Flops by low-to-high transitions at the appropriate Clock pins (A-to-B Clock or B-to-A Clock) regardless of the select or enable or enable control pins. When A-to-B Source and B-to-A Source are in the real-time transfer mode, it is also possible to store data without using the internal D-type Flip-Flops by simultaneously enabling Direction and Output Enable. In this configuration each output reinforces its input. Thus, when all other data sources to the two sets of bus lines are at high impedance, each set of bus lines will remain at its last state. By Integral Corp.
IN74ACT652 's PackagesIN74ACT652 's pdf datasheet

IN74ACT652 Pinout, Pinouts
IN74ACT652 pinout,Pin out
This is one package pinout of IN74ACT652,If you need more pinouts please download IN74ACT652's pdf datasheet.

IN74ACT652 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

IN74ACT652 Pb-Free IN74ACT652 Cross Reference IN74ACT652 Schematic IN74ACT652 Distributor
IN74ACT652 Application Notes IN74ACT652 RoHS IN74ACT652 Circuits IN74ACT652 footprint