8-Bit Serial Or Parallel-Input/ Serial-Output Shift Register

The IN74HC166 is identical in pinout to the LS/ALS166. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This device is a parallel-in or serial-in, serial-out Shift register with gated Clock inputs and an overriding clear input. The shift/load input establishes the parallel-in or serial-in mode. When high, this input enables the serial data input and couples the eight Flip-Flops for serial shifting with each Clock pulse. Synchronous loading occurs on the next Clock pulse when this is low and the parallel data inputs are enabled. Serial data flow is inhibited during parallel loading. Clocking is done on the low-to-high level edge of the Clock pulse via a two input positive NOR Gate which permits one input to be used as a Clock enable or Clock inhibit function. Clocking is inhibited when either of the Clock inputs are held high, holding either input low enables the other Clock input. This will allow the system Clock to be free running and the Register stopped on command with the other Clock input. A change from low-to-high on the Clock inhibit input should only be done when the Clock input is high. A buffered direct clear input overrides all other inputs, including the Clock andsets all Flip-Flop to zero. By Integral Corp.
IN74HC166 's PackagesIN74HC166 's pdf datasheet

IN74HC166 Pinout, Pinouts
IN74HC166 pinout,Pin out
This is one package pinout of IN74HC166,If you need more pinouts please download IN74HC166's pdf datasheet.

IN74HC166 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

IN74HC166 Pb-Free IN74HC166 Cross Reference IN74HC166 Schematic IN74HC166 Distributor
IN74HC166 Application Notes IN74HC166 RoHS IN74HC166 Circuits IN74HC166 footprint
Hot categories