Presettable BCD/Decade UP/DOWN Counter

The IN74HC192 is identical in pinout to the LS/ALS192. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The Counter has two separate Clock inputs, a Count Up Clock and Count Down Clock inputs. The direction of counting is determined by which input is clocked. The outputs change state synchronous with the LOW-to-HIGH transitions on the Clock inputs. This Counter may be preset by entering the desired data on the P0, P1, P2, P3 input. When the Parallel Load input is taken low the data is loaded independently of either Clock input. This feature allows the Counters to be used as devide-by-n by modifying the count lenght with the preset inputs. In addition the Counter CAN also be cleared. This is accomplished by inputting a high on the Master Reset input. All 4 internal stages are set to low independently of either Clock input.Both a Terminal Count Down (TCD) and Terminal Count Up (TCU) Outputs are provided to enable cascading of both up and down counting functions. The TCD output produces a negative going pulse when the Counter underflows and TCU outputs a pulse when the Counter overflows. The Counter CAN be cascaded by connecting the TCU and TCD outputs of one device to the Count Up Clock and Count Down Clock inputs, respectively, of the next device. By Integral Corp.
IN74HC192 's PackagesIN74HC192 's pdf datasheet

IN74HC192 Pinout, Pinouts
IN74HC192 pinout,Pin out
This is one package pinout of IN74HC192,If you need more pinouts please download IN74HC192's pdf datasheet.

IN74HC192 circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

IN74HC192 Pb-Free IN74HC192 Cross Reference IN74HC192 Schematic IN74HC192 Distributor
IN74HC192 Application Notes IN74HC192 RoHS IN74HC192 Circuits IN74HC192 footprint
Hot categories