Single Event And Total Dose Hardened, High-Speed, Dual Output PWM

The single event and total dose hardened IS-1825ASRH pulse width Modulator is designed to be used in high frequency, switching power supplies in either voltage or current-mode configurations. The design includes a precision Voltage Reference a low power start-up circuit, a high frequency Oscillator a wide-band error Amplifier and a fast current-limit Comparator The use of proprietary process capabilities and unique design techniques results in fast propagation delay times and high output current over a wide range of output voltages.
Constructed with the Intersil Rad-hard Silicon Gate (RSG) dielectrically isolated BiCMOS process, these devices are immune to single event latch-up and have been specifically designed to provide a high level of immunity to single event transients. All specified parameters are guaranteed and tested for 300krad(Si) total dose performance.
By Intersil Corporation
Part Manufacturer Description Datasheet Samples
5962F0251101V9X Intersil Corporation IC SWITCHING CONTROLLER, UUC16, DIE-16, Switching Regulator or Controller
IS0-1825ASRH-Q Intersil Corporation Single Event Hardened High-Speed, Dual Output PWM; Temperature Range: -55°C to 125°C; Package: Die (Military Visual)
FF-SMZFOC20 Honeywell Sensing and Control Cable extensions; without cable-to-cable connector, used if the control unit is installed a significant distance away from the mat; 20 m [65.6 ft] cable length
FF-SMZFOC10 Honeywell Sensing and Control Cable extensions; without cable-to-cable connector, used if the control unit is installed a significant distance away from the mat; 10 m [32.8 ft] cable length
FF-SMZFOC02 Honeywell Sensing and Control Cable extensions; without cable-to-cable connector, used if the control unit is installed a significant distance away from the mat; 2 m [6.56 ft] cable length
FF-SMZFOC05 Honeywell Sensing and Control Cable extensions; without cable-to-cable connector, used if the control unit is installed a significant distance away from the mat; 5 m [16.4 ft] cable length
EHM-D-HISS Honeywell Sensing and Control Monitors for pressurized leaks in joints, vessels, seals, and gaskets. Because of the nature of pipework, this device is able to pick up the sonic signature of leaks from several meters away from the source.
FF-SMZ175196 Honeywell Sensing and Control Kit of two cable-to-cable connectors; used to interconnect fiber optic cable, two connectors are required for the connection of the mat to the control unit via a cable extension, one connector is required to connect two mats in series to the control unit;
PMP2614 Texas Instruments The PMP2614 is an isolated opto-less single-stage PFC flyback. The loop is closed to the primary sid
ADC12DS105LFEB Texas Instruments The ADC12DS105 is a dual 12-Bit, 105 Msps A/D Converter
IS-1825ASRH 's PackagesIS-1825ASRH 's pdf datasheet
IS0-1825ASRH-Q
IS1-1825ASRH-8 DIP
IS1-1825ASRH-Q DIP
IS9-1825ASRH-8
IS9-1825ASRH-Q

IS-1825ASRH pdf datasheet download


IS-1825ASRH Pinout, Pinouts
IS-1825ASRH pinout,Pin out
This is one package pinout of IS-1825ASRH,If you need more pinouts please download IS-1825ASRH's pdf datasheet.

IS-1825ASRH circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

IS-1825ASRH Pb-Free IS-1825ASRH Cross Reference IS-1825ASRH Schematic IS-1825ASRH Distributor
IS-1825ASRH Application Notes IS-1825ASRH RoHS IS-1825ASRH Circuits IS-1825ASRH footprint