34�A Micro-power Single Rail-to-Rail Input-Output (RRIO) Low Input Bias Current Op Amps
The ISL28168 and ISL28268 are micro-power Operational Amplifiers optimized for single supply operation over a power supply range of 2.4VDC to 5.5VDC. These devices draw minimal supply current and operate Rail-to-Rail at the input and output, while providing excellent DC-accuracy, noise and output drive specifications. Competing devices seriously degrade these parameters to achieve micro-power supply current.
The parts feature an Input Range Enhancement Circuit (IREC) which enables them to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.25V above the positive supply and to 100mV below the negative supply with only a slight degradation of the CMRR performance. The output operation is Rail-to-Rail
The 1/f corner of the voltage noise spectrum is at 100Hz. This results in low frequency noise performance which CAN only be found on devices with an order of magnitude higher supply current.
ISL28168 and ISL28268 CAN be operated from one lithium cell or two Ni-Cd batteries. The ISL28168 contains an enable pin feature that allows the device to be shutdown when not in use.
By Intersil Corporation
|ISL28168 Pb-Free||ISL28168 Cross Reference||ISL28168 Schematic||ISL28168 Distributor|
|ISL28168 Application Notes||ISL28168 RoHS||ISL28168 Circuits||ISL28168 footprint|