�15kV ESD Protected, 5V, Two Port, Dual Protocol (RS-232/RS-485) Transceivers

The ISL81334 ISL41334 are two port Interface ICs where each port CAN be independently configured as a single RS-485 RS-422 transceiver, or as a dual (2 Tx, 2 Rx) RS- 232 transceiver. With both ports set to the same mode, two RS-485 RS-422 transceivers, or four RS-232 transceivers are available.
If either port is in RS-232 mode, the onboard Charge Pump generates RS-232 compliant 5V Tx output levels from a single VCC supply as low as 4.5V. Four small 0.1F capacitors are required for the Charge Pump The transceivers are RS-232 compliant, with the Rx inputs handling up to 25V, and the Tx outputs handling 12V.
In RS-485 mode, the transceivers support both the RS-485 and RS-422 differential Communication standards. The receivers feature "full failsafe" operation, so the Rx outputs remain in a high state if the inputs are open or shorted together. The transmitters support up to three data rates, two of which are slew rate limited for problem free Communications The Charge Pump disables when both ports are in RS-485 mode, thereby saving power, minimizing noise, and eliminating the Charge Pump capacitors.
Both RS-232 and RS-485 modes feature loopback and shutdown functions. Loopback internally connects the Tx outputs to the corresponding Rx input, to facilitate board level self test implementation. The outputs remain connected to the loads during loopback, so connection problems (e.g., shorted connectors or cables) CAN be detected. Shutdown mode disables the Tx and Rx outputs, disables the Charge Pumps and places the IC in a low current (A) mode.
The ISL41334 is a QFN packaged device that includes two additional user selectable, lower speed and edge rate options for EMI sensitive designs, or to allow longer bus lengths. It also features a Logic supply pin (VL) that sets the VOH level of Logic outputs, and the switching points of Logic inputs, to be compatible with another supply voltage in mixed voltage systems. The QFN also adds active low Rx enable pins to increase design flexibility, allowing Tx/Rx direction control, via a single signal per port, by connecting the corresponding DE and RXEN pins together.
For a single port version of these devices, please see the ISL81387 ISL41387 data sheet.
By Intersil Corporation
Part Manufacturer Description Datasheet Samples
ISL41334IRZ-T7A Intersil Corporation ±15kV ESD Protected, 5V, Two Port, Dual Protocol (RS-232/RS-485) Transceivers; QFN40; Temp Range: -40° to 85°C
ISL41334IRZ Intersil Corporation ±15kV ESD Protected, 5V, Two Port, Dual Protocol (RS-232/RS-485) Transceivers; QFN40; Temp Range: -40° to 85°C
ISL41334IRZ-T Intersil Corporation ±15kV ESD Protected, 5V, Two Port, Dual Protocol (RS-232/RS-485) Transceivers; QFN40; Temp Range: -40° to 85°C
ISL41334 's PackagesISL41334 's pdf datasheet
ISL41334IRZ QFN
ISL41334IRZ-T QFN




ISL41334 Pinout, Pinouts
ISL41334 pinout,Pin out
This is one package pinout of ISL41334,If you need more pinouts please download ISL41334's pdf datasheet.

ISL41334 Application circuits
ISL41334 circuits
This is one application circuit of ISL41334,If you need more circuits,please download ISL41334's pdf datasheet.


Related Electronics Part Number

Related Keywords:

ISL41334 Pb-Free ISL41334 Cross Reference ISL41334 Schematic ISL41334 Distributor
ISL41334 Application Notes ISL41334 RoHS ISL41334 Circuits ISL41334 footprint
Hot categories