MP3/USB 2.0 High Speed Switch With Negative Signal Handling

The Intersil ISL54206A dual SPDT (Single Pole/Double Throw) switches combine low distortion Audio and accurate USB 2.0 high speed data (480Mbps) signal switching in the same low voltage device. When operated with a 2.7V to 3.6V single supply these Analog Switches allow Audio signal swings below-ground, allowing the use of a common USB and Audio Headphone connector in Personal Media Players and other portable battery powered devices.
The ISL54206A Logic control pins are 1.8V compatible which allows for control via a standard controller. With a VDD voltage in the range of 2.7V to 3.6V the IN pin voltage CAN exceed the VDD rail allowing for the USB 5V VBUS voltage from a computer to directly drive the IN pin to Switch between the Audio and USB signal sources in the portable device. The part has an Audio enable control pin to open all the switches and put the part in a low power state.
The ISL54206A is available in a small 10 Ld 2.1mmx1.6mm ultra-thin TQFN package and a 10 Ld 3mmx3mm TDFN package. It operates over a temperature range of -40 to +85C.
By Intersil Corporation
ISL54206A 's PackagesISL54206A 's pdf datasheet
ISL54206AIRTZ TDFN
ISL54206AIRTZ-T TDFN
ISL54206AIRUZ-T UTQFN




ISL54206A Pinout, Pinouts
ISL54206A pinout,Pin out
This is one package pinout of ISL54206A,If you need more pinouts please download ISL54206A's pdf datasheet.

ISL54206A Application circuits
ISL54206A circuits
This is one application circuit of ISL54206A,If you need more circuits,please download ISL54206A's pdf datasheet.


Related Electronics Part Number

Related Keywords:

ISL54206A Pb-Free ISL54206A Cross Reference ISL54206A Schematic ISL54206A Distributor
ISL54206A Application Notes ISL54206A RoHS ISL54206A Circuits ISL54206A footprint