Clock IC with Digital Trimming, 32 kHz Crystal, Integrated Capacitors, Mask Options 1.1 to 2.2V Supply The e1466D is an integrated circuit in CMOS Silicon Gate Technology for analog
clocks. It consists of a 32-kHz oscillator, frequency divider, output pulse ...
The integrated circuit U211B is designed as a phase-control circuit in bipolar technol-
ogy with an internal frequency-to-voltage converter. The device includes an internal
control amplifier which means it can be used for speed-regulated motor applications. ...
The U2008B is designed as a phase-control circuit in bipolar technology. It enables
load-current detection as well as mains-compensated phase control. Motor control
with load-current feedback and overload protection are preferred applications. ...
The U2010B is designed as a phase-control circuit in bipolar technology for motor
control applications with load-current feedback and overload protection. It enables
load-current detection and has a soft-start function as well as reference voltage ...
The integrated circuit U209B is designed as a phase-control circuit in bipolar technol-
ogy with an internal frequency-to-voltage converter. The device includes an internal
open-loop amplifier, which means it can be used for motor speed control with ...
The timer control circuit U2100B uses bipolar technology. It has different mode selec-
tions (zero voltage switch, phase control and relay control). The output stage is
triggered according to input conditions. It can be used in triac application for two- or ...
The timer control circuit U2102B is based on bipolar technology. The output stage can
switch either a MOSFET or an IGBT. Two sensor inputs and the retriggerable and
adjustable tracking time useful for a wide range of applications. By using the reverse ...
The integrated circuit, T2117, is designed as a zero-voltage switch in bipolar technol-
ogy. It is used to control resistive loads at mains by a triac in zero-crossing mode. A
ramp generator allows power control function by period group control, whereas ...
The FZE1658 is an integrated interface for digital sensors - i.e. proximity switches - in
industrial automation equipment. The IC has eight integrated highly protected and
failsafe inputs with status LED and a serial synchronous output for direct ...
The IC comprises four driver circuits capable of driving power transistors (PNP or
PMOS). The output transistors are protected against short-circuit to ground and supply
voltage. The turn-ON threshold can be set from 1.5 V to 7 V. Overload at one or ...
For applications where the SLB 0586 A has been used, it is possible to replace the
SLB0586 by the SLB0587 if the appropriate external wiring in accordance with the data
sheet is maintained.
The SLB0587 is a CMOS IC and the advanced version of the ...
For applications where the SLB0586A has been used, it is possible to replace the
SLB 0586 A by the SLB0587 if the appropriate external wiring in accordance with the data
sheet is maintained.
The SLB0587 is a CMOS IC and the advanced version of the version ...
The T6B70BFG is designed to be used mainly as an interface IC
for communication between hot water dispensers and the
corresponding controller unit, and comes equipped with a two
channel 4-bit D/A converter, pseudo sine wave generator and an
external ...
The T6B70BFG is designed to be used mainly as an interface IC
for communication between hot water dispensers and the
corresponding controller unit, and comes equipped with a two
channel 4-bit D/A converter, pseudo sine wave generator and an
external ...
