The TIR1000 serial infrared (SIR) encoder/decoder is a CMOS device which encodes and decodes bit data in conformance with the IrDA specification. A transceiver device is needed to interface to the photo-sensitive diode (PIN) and the light emitting diode ...
MCP2140 The MCP2140 is a cost-effective, low pin count (18-pin)
easy-to-use device for implementing IrDA standar
wireless connectivity. The MCP2140 provides suppor
for the IrDA standard protocol stack, bit encodi
decoding and low cost, discrete IR receiver ...
MCP2140A The MCP2140A is a cost-effective, low pin count (18-
pin), easy-to-use device for implementing IrDA
standard wireless connectivity. The MCP2140A
provides support for the IrDA standard protocol stack,
bit encoding/decoding and low cost, discrete ...
MCP2120 This document contains device specific information for
the following device:
, MCP2120
This device is a low-cost, high-performance, fully-static
infrared encoder/decoder. This device sits between a
UART and an infrared (IR) optical transceiver. ...
MCP2122 The MCP2122 is a stand-alone IrDA standard encoder/
decoder device that is pinout-compatible with the
,
Agilent HSDL-7000 encoder/decoder.
The MCP2122 has two interfaces: the host UART
interface and the IR interface (see Figure 1-1). The ...
MCP2155 MCP2155 provided IrDA protocol handling PLUS bit encoding/decoding functionality for Data Communication Equipment (DCE) applications in one low pincount device ...
MCP2150 This document contains device specific information for
the following device:
, MCP2150
The MCP2150 is a cost effective, low pin count (18-pin),
easy to use device for implementing IrDA standard wire-
less connectivity. The MCP2150 provides support ...
The SC16C554/554D is a 4-channel Universal Asynchronous Receiver and
Transmitter (QUART) used for serial data communications. Its principal function is to
convert parallel data into serial data and vice versa. The UART can handle serial data
rates up to 5 ...
The SC16C654/654D is a 4-channel Universal Asynchronous Receiver and
Transmitter (QUART) used for serial data communications. Its principal function is to
convert parallel data into serial data and vice versa. The UART can handle serial data
rates up to 5 ...
The SC68C652B is a 2 channel Universal Asynchronous Receiver and Transmitter
(UART) used for serial data communications. Its principal function is to convert parallel
data into serial data and vice versa. The UART can handle serial data rates up to 5 ...
The IC U2538B is a complete IR receiver for data communication. The useful input
signals are separated by a special input circuit and amplified by a gain-controlled
amplifier. The bandpass filter suppresses the off-band signals. The signal detector, ...
The IC T2525 is a complete IR receiver for data communication that was developed
and optimized for use in carrier-frequency-modulated transmission applications. The
IC offers highest sensitivity as well as highest suppression of noise from daylight ...
The IC T2526 is a complete IR receiver for data communication developed and opti-
mized for use in carrier-frequency-modulated transmission applications. The IC offers
highest sensitivity as well as highest suppression of noise from daylight and lamps.
The ...
The IC ATA2525 is a complete IR receiver for data communication that was devel-
oped and optimized for use in carrier-frequency-modulated transmission applications.
The IC combines small size with high sensitivity as well as high suppression of noise
from ...
The IC ATA2526 is a complete IR receiver for data communication developed and
optimized for use in carrier-frequency-modulated transmission applications. The IC
combines small size with high sensitivity as well as high suppression of noise from
daylight and ...
The MAX3130/MAX3131 combine an IrDA 1.2 compatible infrared transceiver with an RS-232 interface-all in a single 3V-powered hybrid microcircuit. The infrared transceiver supports IrDA data rates of 2.4kbps to 115kbps. The infrared receive channel provides a ...
The MAX3130/MAX3131 combine an IrDA 1.2 compatible infrared transceiver with an RS-232 interface-all in a single 3V-powered hybrid microcircuit. The infrared transceiver supports IrDA data rates of 2.4kbps to 115kbps. The infrared receive channel provides a ...
The MAX3120 IrDA 1.2-compatible infrared transceiver is optimized for battery-powered, space-constrained applications. It consumes only 120A while supporting data rates up to 115kbps over a wide 3V to 5.5V operating range, and features a 10nA shutdown mode to ...
TFDU4101 The TFDU4101 transceiver is an infrared transceiver
module compliant to the latest IrDA physical layer
standard for fast infrared data communication,
supporting IrDA speeds up to 115.2 kbit/s (SIR), and
carrier based remote control modes. ...
TFDU4300 The TFDU4300 is a low profile (2.5 mm) infrared
transceiver module with independent logic reference
voltage (V ) for low voltage IO interfacing. It is
logic
,
compliant to the latest IrDA physical layer standard
for fast infrared data ...
TFBS4711 - Serial Infrared Transceiver SIR, 115.2 kbit/s, 2.7 V to 5.5 V Operation - Vishay Infrared transceivers TFBS4711 The TFBS4711 is a low profile, Infrared Data Trans-
ceiver module. It supports IrDA data rates up to
115.2 kbit/s (SIR). The ...
TFBS4650 - Infrared Transceiver 9.6 kbit/s to 115.2 kbit/s (SIR) - Vishay Infrared transceivers TFBS4650 ,
The TFBS4650 is one of the smallest IrDA compliant
transceivers available. It supports data rates up to
115 kbit/s. The transceiver consists of a ...
TFBS4652 - Infrared Transceiver 9.6 kbit/s to 115.2 kbit/s (SIR - Vishay Infrared transceivers TFBS4652 The TFBS4652 is one of the smallest IrDA compliant
transceivers available. It supports data rates up to
115 kbit/s. The transceiver consists of a PIN ...
TFBS5700 The TFBS5700 is a low profile infrared transceiver
module compliant to the latest IrDA physical layer
standard for fast infrared data communication, sup-
porting IrDA speeds up to 1.152 Mbit/s (MIR) and car-
rier based remote control modes up to ...
TFDU6103 - Vishay Infrared transceivers TFDU6103 The TFDU6103 is a low-power infrared transceiver
module compliant to the latest IrDA physical layer
standard for fast infrared data communication,
supporting IrDA speeds up to 4.0 Mbit/s (FIR), and
carrier ...
TFDU6300 - Fast Infrared Transceiver Module (FIR, 4 Mbit/s) for 2.4 V to 3.6 V Operation - Vishay Infrared transceivers TFDU6300 The TFDU6300 transceiver is an infrared transceiver
module compliant to the latest IrDA physical layer
low-power standard for ...
TFDU6301 - Fast Infrared Transceiver Module (FIR, 4 Mbit/s) for 2.4 V to 3.6 V Operation and Low-Voltage Logic (1.8 V) - Vishay Infrared transceivers TFDU6301 The TFDU6301 transceiver is an infrared transceiver
module compliant to the latest IrDA physical ...
The TSOP4830
TSOP4833
TSOP4836
TSOP4837
TSOP4838
TSOP4840
TSOP4856 - series are miniaturized receivers for
infrared remote control systems. PIN diode and
preamplifier are assembled on lead frame, the epoxy
package is designed as IR filter. ...
The TC9243APG and TC9243AFG are infrared remote-control
signal transmission LSIs suitable for remote control of audio systems,
TVs, VTRs, CD players, etc. ...
The 312 encoders are a series
of CMOS LSIs for remote control system applications. They
are capable of encoding 12 bits of information which
consists of N address bits and 12-N data bits. Each
address/data input is externally trinary programmable ...
312 decoders are a series
of CMOS LSIs for remote control system applications. They
are paired with 312 series of encoders. For
proper operation a pair of encoder/decoder with the same
number of address and data format should be selected
(refer to the ...
HT600/HT680/HT6207 -- 3^18 Series of Encoders,The encoders are a series
of CMOS LSIs for remote control system applications. They
are capable of encoding 18 bits of information which
consists of N address bits and 18-N data bits. Each
address/data input ...
HT604L/HT614/HT692 -- 3^18 Series of Decoders,The 318 decoders are a series
of CMOS LSIs for remote control system applications. They
are paired with the 318 series of encoders.
For proper operation, a pair of encoder/decoder pair with
the same number of ...
The HT6026 is a CMOS LSI encoder designed
for use in remote control system. It is capable of
encoding 9 bits of information which consists of N
address bits and 9-N data bits. Each address/data input
is externally trinary programmable by external ...
The HT6P20X is a CMOS LSI
encoder designed for remote control system applications.
It encodes 24 bits of information and then serially
transmits it via the DOUT pin upon receipt of
transmission enable (DATA pins: D0~D7) signals. The
combination of address ...
The HT6230 is designed as infrared remote
encoder, usually applied to TV systems. A total of 2048
different commands can be generated and arranged into 32
systems where each system contains 64 different commands.
There are 96 keys and to each key is ...
HT6240-002 is designed as infrared remote encoders
usually applied to TV systems. The 48 key matrix inpu
and the extension bit input can transmit amax. of 256 in ...
RPM871/RPM871-H12/RPM871-H14 is the micro infrared module based on IrDA1.2(Low Power) RPM871 standard suitable for cellular phone and information communication apparatus. An infrared LED, a pin-photo diode, and LSI all contained in a very small single ...
RPM871/RPM871-H12/RPM871-H14 is the micro infrared module based on IrDA1.2 RPM871-H12 (Low Power) standard suitable for cellular phone and information communication apparatus. An infrared LED, a pin-photo diode, and LSI all contained in a very small single ...
RPM871/RPM871-H12/RPM871-H14 is the micro infrared module based on IrDA1.2(Low Power) RPM871-H14 standard suitable for cellular phone and information communication apparatus. An infrared LED, a pin-photo diode, and LSI all contained in a very small single ...
RPM872 is the micro infrared module based on IrDA1.2(Low Power) RPM872 standard suitable for cellular phone and information communication apparatus. An infrared LED, a pin-photo diode, and LSI all contained in a very small single package. It is also equipped ...
RPM872-H12 is the micro infrared module based on IrDA1.2(Low Power) RPM872-H12 standard suitable for cellular phone and information communication apparatus. An infrared LED, a pin-photo diode, and LSI all contained in a very small single package. It is also ...
RPM872-H14 is the micro infrared module based on IrDA1.2(Low Power) RPM872-H14 standard suitable for cellular phone and information communication apparatus. An infrared LED, a pin-photo diode, and LSI all contained in a very small single package. It is also ...
RPM873 is the micro infrared module based on IrDA1.2(Low Power) standard suitable for cellular phone and information communication apparatus. An infrared LED, a pin-photo diode, and LSI all contained in a very small single package. It is also equipped with low ...
RPM960-H14 is an infrared module based on IrDA1.3(Low Power) RPM960-H14 standard. An infrared LED, a pin-photo diode, and LSI all contained in single package. It is also equipped with low power consumption and power down functions in addition to the design, ...
RRPM971-H14 is an infrared module based on IrDA1.4(Low Power) RPM971-H14 standard. An infrared LED, a pin-photo diode, and LSI all contained in single package. It is also equipped with low power consumption and power down functions in addition to the design, ...
RPM972-H14 is an infrared module based on IrDA1.4(Low Power) RPM972-H14 standard with remote control transmisson function. An infrared LED, a pin-photo diode, and LSI all contained in single package. It is also equipped with low power consumption and power ...
RPM5537 series are super small & surface mounting type\'s remote controller receiver. It can be used for anything if it is a product to manipulate by the remote control. For example, AV equipment (TV, DSC, car stereo system, toy, etc),housing equipment (air ...
RPM5337 series are super small & surface mounting type\'s remote controller receiver. It can be used for anything if it is a product to manipulate by the remote control. For example, AV equipment (TV, DSC, car stereo system, toy, etc),housing equipment (air ...
RPM7136-R series are remote control receiver modules. Small-sized, light-weight, and low current consumption modules have been achieved by using resin mold. All household electric appliances such as TV, DVD, air conditioner and audio equipment. ...
RPM7137-R series are remote control receiver modules. Small-sized, light-weight, and low current consumption
modules have been achieved by using resin mold. ...
RPM7138-R series are remote control receiver modules. Small-sized, light-weight, and low current consumption modules have been achieved by using resin mold. All household electric appliances such as TV, DVD, air conditioner and audio equipment. ...
RPM7140-R series are remote control receiver modules. Small-sized, light-weight, and low current consumption modules have been achieved by using resin mold. All household electric appliances such as TV, DVD, air conditioner and audio equipment. ...
RPM7157-R series is remote control receiver modules. Small-sized, light-weight, and low current consumption modules have been achieved by using resin mold. All household electric appliances such as TV, DVD, air conditioner and audio equipment. ...
The NJL21H000A series are small and high performance receiving devices for infrared remote control system. They can operate under low and wide supply voltage(2.7V to 5.5V) with enhanced immunity against the disturbance light. ...
NJL25VH000 series are small and high performance receiving devices for infrared remote control system. They can operate under low and wide supply voltage(2.7V to 5.5V). NJL25V000 series are mesh window type to improve EMI characteristic. Even under strong EMI ...
The NJL31H000A series are small and high performance receiving devices for infrared remote control system. They can operate under low and wide supply voltage(2.7V to 5.5V) with enhanced immunity against power saving light. The NJL31H000A series have six kinds ...
NJL35V000 NJL38H000 series are small and high performance receiving devices for infrared remote control system.They can operate under low and wide supply voltage(2.7V to 5.5V). NJL35V000 series are mesh window type to improve EMI characteristic. Even under ...
NJL61H000 series are small and high performance receiving devices for infrared remote control system. Comparing with the previous version NJL51H000 seriesthe characteristic for invertor flurescent lamp noise is improved. The pulse width of NJL61H000 series are ...
NJL65V000 series are small and high performance receiving devices for infrared remote control system. NJL65V000 series are mesh window type to improve EMI characteristic. Even under a lot of EMI noise conditionsuch as TVVCRAri-conditioneretc.NJL65V000 series ...
The device is a miniature SMD type infrared remote
control system receiver that has been developed and
designed by utilizing the most updated IC technology. The
PIN diode and preamplifier are assembled on PCB, the
epoxy package is designed as an IR ...
IRM-3636 The device is a miniature type infrared remote control system
receiver which has been developed and designed by utilizing
the most updated IC technology. The PIN diode and
preamplifier are assembled on lead frame, the epoxy ...
The IRM-2638AF31 are miniaturized receivers for infrared
remote control systems. PIN diode and preamplifier are
assembled on lead frame, the epoxy package is designed as IR
filter. The demodulated output signal can directly be decoded by
a ...
The IRM-2638F12 are miniaturized receivers for infrared remote
control systems. PIN diode and preamplifier are assembled on
lead frame, the epoxy package is designed as IR filter. The
demodulated output signal can directly be decoded by a ...
,The IRM-2638F4 are miniaturized receivers for infrared remote
control systems. PIN diode and preamplifier are assembled on
lead frame, the epoxy package is designed as IR filter. The
demodulated output signal can directly be decoded by a ...
IRM-2638F6 Infrared Remote-control Receiver Module The IRM-2638F6 are miniaturized receivers for infrared remote
control systems. PIN diode and preamplifier are assembled on
lead frame, the epoxy package is designed as IR filter. The
demodulated ...
IRM-2638H1 The IRM-2638H1 are miniaturized receivers for infrared
remote control systems. PIN diode and preamplifier are
assembled on lead frame, the epoxy package is designed as IR
filter. The demodulated output signal can directly be decoded by
a ...
The IRM-2638S36-P are miniaturized receivers for infrared
remote control systems. PIN diode and preamplifier are
assembled on lead frame, the epoxy package is designed as IR
filter. The demodulated output signal can directly be decoded
by a ...
The IRM-2638TF4 is miniaturized receivers for infrared
remote control systems. PIN diode and preamplifier are assembled
on lead frame, the epoxy package is designed as IR filter. The
demodulated output signal can directly be ...
The IRM-2738F4 are miniaturized receivers for infrared remote
control systems. PIN diode and preamplifier are assembled on
lead frame, the epoxy package is designed as IR filter. The
demodulated output signal can directly be decoded by a ...