Octal 3-state Bus Transceivers And D Flip-flops High-speed Silicon-gate CmosThe KK74AC651 is identical in pinout to the LS/ALS651,
HC/HCT651. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS outputs.
These devices consists of Bus Transceiver circuits, D-type Flip-Flop
and control circuitry arranged for multiplex transmission of data directly
from the data bus or from the internal storage Registers Direction and
Output Enable are provided to select the read-time or stored data function.
Data on the A or B Data bus, or both, CAN be stored in the internal D flip-
flops by low-to-high transitions at the appropriate Clock pins (A-to-B
Clock or B-to-A Clock) regardless of the select or enable or enable
control pins. When A-to-B Source and B-to-A Source are in the real-time
transfer mode, it is also possible to store data without using the internal
D-type Flip-Flops by simultaneously enabling Direction and Output
Enable. In this configuration each output reinforces its input. Thus, when
all other data sources to the two sets of bus lines are at high impedance,
each set of bus lines will remain at its last state. By Kodenshi Korea Corp.
|
|
KK74AC651 Pb-Free | KK74AC651 Cross Reference | KK74AC651 Schematic | KK74AC651 Distributor |
KK74AC651 Application Notes | KK74AC651 RoHS | KK74AC651 Circuits | KK74AC651 footprint |