16 Megabit Flashbank Memory Semicon Device

The LE28BW168T consists of two memory banks, 2 each 512K x 16 bits sector mode Flash EEPROM manufactured with SANYO's proprietary, high performance FlashTechnol- ogy. The LE28BW168T writes with a 3.0-volt-only power supply. The LE28BW168T is divided into two separate memory banks, 2 each 512K x 16 Flash banks. Each Flash bank is typically used for program code storage and contains 512 sectors, each of 1K words or 16 blocks, each of 32K words. The Flash banks may also be used to store data. Any bank may be used for executing code while writing data to a different bank. Each memory bank is controlled by separate Bank selection address (A19) lines. The LE28BW168T inherently uses less energy during Erase, and Program than alternative Flash technologies. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the Flash technology uses less current to program and has a shorter Erase time, the total energy consumed during any Erase or Program operation is less than alternative Flash technologies. The Auto Low Power mode automatically reduces the active read current to approximately the same as standby; thus, providing an average read current of approxi- mately 1 mA/MHz of Read cycle time. By Sanyo Semiconductor Corporation
LE28BW168T 's PackagesLE28BW168T 's pdf datasheet



LE28BW168T Pinout, Pinouts
LE28BW168T pinout,Pin out
This is one package pinout of LE28BW168T,If you need more pinouts please download LE28BW168T's pdf datasheet.

LE28BW168T circuits will be updated soon..., now you can download the pdf datasheet to check the circuits!

Related Electronics Part Number

Related Keywords:

LE28BW168T Pb-Free LE28BW168T Cross Reference LE28BW168T Schematic LE28BW168T Distributor
LE28BW168T Application Notes LE28BW168T RoHS LE28BW168T Circuits LE28BW168T footprint
Hot categories