• Product pinout
  • Description
  • TPIC2810,8-Bit LED Driver With I2C Interface
  • The TPIC2810 device is a monolithic, medium-voltage, low-current, 8-bit shift register design to drive low-side switched resistive loads such as LEDs. The device is not recommended for switching inductive loads.
    This device contains an 8-bit, serial-in, ...
  • TPS61043,TPS61043: Constant Current LED Driver
  • The TPS61043 is a high frequency boost converter with constant current output that drives white LEDs or similar. The LED current is set with the external sense resistor (RS) and is directly regulated by the feedback pin (FB) that regulates the voltage across ...
  • TLC5904,8/16-Channel LED Driver
  • The TLC5904 is a constant current driver incorporating shift register, data latch, and constant current circuitry with current value adjustable and a 256 gray scale display using pulse width control. The output current can be selected as maximum 80 mA with 16 ...
  • TLC5905,8/16-Channel LED Driver
  • The TLC5905 is a constant current driver that incorporates shift register, data latch, constant current circuitry with a current value adjustable and 256 gray scale display that uses pulse width control. The output current can be selected as maximum 80 mA with ...
  • TLC5911,16-Channel LED Driver
  • The TLC5911 is a constant current driver incorporating shift register, data latch, and constant current circuitry with a current value adjustable, PLL circuitry for gray scale control clock generation, and 1024 gray scale display using pulse width control. The ...
  • TLC5916,8-Bit Constant-Current LED Sink Driver
  • The TLC5916/TLC5917 is designed for LED displays and LED lighting applications with constant-current control and open-load, shorted-load, and overtemperature detection. The TLC5916/TLC5917 contains an 8-bit shift register and data latches, which convert serial ...
  • TLC5917,8-Bit Constant-Current LED Sink Driver
  • The TLC5916/TLC5917 is designed for LED displays and LED lighting applications with constant-current control and open-load, shorted-load, and overtemperature detection. The TLC5916/TLC5917 contains an 8-bit shift register and data latches, which convert serial ...
  • TLC5920,16-Channel LED Driver
  • The TLC5920 is an LED driver incorporating a 16-channel shift register, data latch, and constant current circuitry with current value control and 8-channel common driver into a single chip. The constant output current is capable of 30 mA for 16 bits ...
  • TLC5921,16-Channel LED Driver
  • The TLC5921 is a current-sink constant current driver incorporating shift register and data latch. The current value at constant current output can be set by one external register. The device also incorporates thermal shutdown (TSD) circuitry which turns ...
  • TLC5922,16-Channel LED Driver W/DOT Correction
  • The TLC5922 is a 16-channel constant-current sink driver. Each channel has an On/Off state and a 128-step adjustable constant-current sink (dot correction). The dot correction adjusts the brightness variations between LED, LED channels, and other LED Drivers ...
  • TLC5923,16-Channel LED Driver W/DOT Correction
  • The TLC5923 is a 16 channel constant-current sink driver. Each channel has a On/Off state and a 128-step adjustable constant current sink (dot correction). The dot correction adjusts the brightness variations between LED, LED channels and other LED Drivers ...
  • TLC5924,16-Channel LED Driver W/DOT Correction & Pre-Charge FET
  • The TLC5924 is a 16 channel constant?current sink driver. Each channel has a On/Off state and a 128?step adjustable constant current sink (dot correction). The dot correction adjusts the brightness variations between LED, LED channels and other LED Drivers ...
  • TLC5930,12 Channel LED Driver
  • The TLC5930 is a constant-current sink driver with an adjustable current value, and 1024 gray scale display that uses pulse width control. The output current is 0.2 mA to 40 mA with 12 bits of RGBx4. The maximum current value of the constant-current output can ...
  • TLC5942,16-Channel 12-bit PWM With 7-bit Dot Correction
  • The TLC5942 is a 16-channel, constant current sink driver. Each channel is individually adjustable with 4096 pulse-width modulated (PWM) steps and 128 constant current sink steps for dot correction. Dot correction adjusts the brightness variations between ...
  • LM4970,Audio Synchronized Color LED Driver
  • The LM4970 is a LED driver with an audio synchronization mode that virtually eliminates the need for real time software processing for LED lighting effects. The LM4970 includes three individual PWM color LED Drivers that provide up to 42mA of current drive for ...
  • LP3943,RGB/White/Blue 16-LED Fun Light Driver
  • LP3943 is an integrated device capable of independently driving 16 LEDs. This device also contains an internal precision oscillator that provides all the necessary timing required for driving each LED. Two prescaler registers along with two PWM registers ...
  • LM3914,Dot/Bar Display Driver
  • The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, ...
  • LM3915,Dot/Bar Display Driver
  • The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDs, LCDs or vacuum fluorescent displays, providing a logarithmic 3 dB/step analog display. One pin changes the display from a bar graph to a moving dot display. ...
  • LM3916,Dot/Bar Display Driver
  • The LM3916 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDs, LCDs or vacuum fluorescent displays, providing an electronic version of the popular VU meter. One pin changes the display from a bar graph to a moving dot ...
  • LP3944,RGB/White/Blue 8-LED Fun Light Driver
  • LP3944 is an integrated device capable of independently driving 8 LEDs. This device also contains an internal precision oscillator that provides all the necessary timing required for driving each LED. Two prescaler registers along with two PWM registers ...
  • LM3430,Boost Controller For LED Backlighting
  • The LM3430 is a high voltage low-side N-channel MOSFET controller. Ideal for use in a boost regulator, the LM3430 can power the LED backlight in LCD panels, such as in notebook PCs. It contains all of the features needed to implement single ended primary ...
  • LM5022,60V Low Side Controller For Boost And SEPIC
  • The LM5022 is a high voltage low-side N-channel MOSFET controller ideal for use in boost and SEPIC regulators. It contains all of the features needed to implement single ended primary topologies. Output voltage regulation is based on current-mode control, ...
  • LM2734Z,Thin SOT23 1A Load Step-Down DC-DC Regulator
  • The LM2734Z regulator is a monolithic, high frequency, PWM step-down DC/DC converter assembled in a 6-pin Thin SOT23 and LLP non pull back package. It provides all the active functions to provide local DC/DC conversion with fast transient response and ...
  • LM3401,Hysteretic PFET Controller For High Power LED Drive
  • The LM3401 is a switching controller designed to provide constant current to high power LEDs. The LM3401 drives an external P-MOSFET switch for step-down (Buck) regulators. The LM3401 delivers constant current within 6% accuracy to a wide variety and number ...
  • LP5522,Programmable LED Driver
  • The LP5522 is a simple single wire programmable LED controller in six bump micro SMD package. It provides constant current flow through high side driver. Output current can be set from 1 mA to 20 mA by using an external resistor on the ISET pin. If no ...
  • LP5521,Programmable Three Channel LED Driver
  • The LP5521 is a three channel LED driver designed to produce variety of lighting effects for mobile devices. High efficiency charge pump enables LED driving over full Li-Ion battery voltage range. The device has a program memory for creating variety of ...
  • LP5520,RGB Backlight LED Driver
  • The LP5520 is an RGB backlight LED driver for small format color LCDs. RGB backlight enables better colors on the display and power savings compared with white LED backlight. LP5520 offers small and simple driver solution without need for optical feedback. ...
  • LP3950,Color LED Driver With Audio Synchronizer
  • The LP3950 is a color LED driver with a built-in audio synchronization feature for any analog audio input such as polyphonic ring tones and MP3 music. LEDs can be synchronized to an audio signal with two methods - amplitude and frequency. Also several fine ...
  • LP3952,6-Channel Color LED Driver With Audio Synchronization
  • LP3952 is a color LED driver for battery powered handheld devices. It drives any color LEDs including RGB LEDs, indicator LEDs and keypad backlight LEDs. The boost DC-DC converter drives high current loads with high efficiency. The stand-alone command based ...
  • LP3954,Advanced Lighting Management Unit
  • LP3954 is an advanced lighting management unit for handheld devices. It drives any phone lights including display backlights, RGB, keypad and camera flash LEDs. The boost DC-DC converter drives high current loads with high efficiency. White LED ...
  • LP39542,Advanced Lighting Management Unit
  • LP39542 is an advanced lighting management unit for handheld devices. It drives any phone lights including display backlights, RGB, keypad and camera flash LEDs. The boost DC-DC converter drives high current loads with high efficiency. White LED ...
  • LP55281,Quad RGB Driver
  • LP55281 is a quad RGB LED driver for handheld devices. It can drive 4 RGB LED sets and a single fun light LED. The boost DC-DC converter drives high current loads with high efficiency. The RGB driver can drive individual color LEDs or RGB LEDs powered from ...
  • AD8240,LED Driver/Monitor
  • The AD8240 LED driver/monitor, in combination with an external transistor, supplies a constant 12 V to drive LED lamps. This allows cost-effective LED lamp monitoring and short-circuit protection. The output is regulated at 12 V when the supply voltage is ...
  • FAN5332A,1.5MHz Boost Converter With 30V Integrated FET Switch
  • High Ef?ciency, High Current Serial LED Driver and OLED Supply with 30V Integrated Switch ,The FAN5332A a LED driver that features fixed frequency mode operation and an integrated FET switch. The device\'s high output power makes it suitable to drive flash ...
  • FAN5645,Indicator LED Blinker With Single-Wire Interface
  • The FAN5645 is a flexible and compact solution for a blinking LED indicator. The internal programmable blink algorithm eliminates any need for continual system processor control. This means longer battery life for the hand-held system because the system ...
  • FAN5607,LED Driver With Adaptive Charge Pump DC/DC Converter
  • More LED driver product information
    The FAN5607 generates regulated output current from a battery with input voltage varying between 2.7V to 5.5V. Switch reconfiguration and fractional switching techniques are utilized to achieve high efficiency over the ...
  • FAN5611,Low Dropout LED Driver For White, Blue Or Any Color LED
  • The FAN5611,FAN5612,FAN5613,FAN5614 low-dropout product family is designed to drive two to four parallel LEDs, providing matched current source bias for all color LEDs. The LED current is set by an external resistor, RSET. The FAN5611,FAN5613 supports four ...
  • FAN5610,LED Driver For White, Blue Or Any Color LED
  • More LED driver product information
    The FAN5610 generates matched current source drives for a maximum of four LEDs. Since each LED current source has its own self-regulating loop, precise current matching is maintained even if there is a substantial ...
  • FAN5609,LED Driver With Adaptive Charge Pump DC/DC Converter
  • More LED driver product information
    The FAN5609 generates regulated output current from a battery with input voltage varying between 2.7V to 5V. Switch reconfiguration and fractional switching techniques are utilized to achieve high efficiency over the ...
  • ISL97801,High Power LED Driver
  • The ISL97801 is a high-power LED backlight driver with an integrated 36V FET designed to drive up to 8 high-power LEDs in series. The PWM converter runs from an internally generated 1MHz clock. With efficiencies over 90% the regulator provides tight control of ...
  • HEF4794B,HEF4794B 8-stage Shift-and-store Register LED Driver
  • The HEF4794B is an 8-stage serial shift register having a storage latch associated with each stage for strobing data from the serial input to parallel LED driver outputs O0 to O7. Data is shifted on positive-going clock transitions. The data in each shift ...
  • PCA9533,PCA9533 4-bit I2C LED Dimmer
  • The PCA9533 is a 4-bit I2C and SMBus I/O expander optimized for dimming LEDs in 256 discrete steps for Red/Green/Blue (RGB) color mixing and back light applications. The PCA9533 contains an internal oscillator with two user programmable blink rates and ...
  • PCA9633,PCA9633 4-bit Fm+ I2C-bus LED Driver
  • The PCA9633 is an I2C-bus controlled 4-bit LED driver optimized for Red/Green/Blue/Amber (RGBA) color mixing applications. Each LED output has its own 8-bit resolution (256 steps) fixed frequency Individual PWM controller that operates at 97 kHz with a duty ...
  • HEF4894B,HEF4894B 12-stage Shift-and-store Register, LED Driver
  • The HEF4894B is a 12 stage serial shift register having a storage latch associated with each stage for strobing data from the serial input to parallel LED driver outputs O0 to O11. Data is shifted on positive-going clock transitions. The data in each shift ...
  • SAA1064,SAA1064 4-digit LED-driver With I2C-bus Interface
  • The LED-driver is a bipolar integrated circuit made in an I2L compatible 18 volts process. The circuit is especially designed to drive four 7-segment LED displays with decimal point by means of multiplexing between two pairs of digits. It features an ...
  • LT3003,LT3003 - 3-Channel LED Ballaster With PWM
  • The LT3003 drives three separate strings of LEDs up to 350mA/channel with 3% accurate current matching, resulting in uniform LED brightness and intensity. This approach is superior to conventional methods of running three separate channels with external ...
  • LT3476,LT3476 - High Current Quad Output LED Driver
  • The LT3476 is a quad output DC/DC converter designed to operate as a constant-current source for driving high current LEDs. A xed frequency, current mode architecture results in stable operation over a wide range of supply and output voltages. A frequency ...
  • LT3496,LT3496 - Triple Output LED Driver
  • The LT3496 is a triple output DC/DC converter designed to operate as a constant-current source and is ideal for driving LEDs. The LT3496 works in buck, boost or buckboost mode. The LT3496 uses a fixed frequency, current mode architecture resulting in stable ...
Hot categories