The TPIC1021 is the LIN (Local Interconnect Network) physical interface, which integrates the serial transceiver with wake up and protection features. The LIN bus is a single wire, bi-directional bus typically used for low-speed in-vehicle networks using baud ...
The TPIC1021A is the Local Interconnect Network (LIN) physical interface, which integrates the serial transceiver with wake-up and protection features. The LIN bus is a single-wire bidirectional bus typically used for low-speed in-vehicle networks using data ...
MCP201 The MCP201 provides a physical interface between
microcontroller and a LIN half-duplex bus. It is intende
for automotive and industrial applications with seri
bus speeds up to 20 Kbaud.
The MCP201 provides a half-duplex, bidirection
communications ...
A System Base Chip (SBC) MC33689 is a monolithic IC combining many functions found in standard microcontroller based systems. i.e., power management, communication interface, system protection, diagnostics, etc. ...
The MC33910 is a Serial Peripheral Interface (SPI)-controlled System Basis Chip (SBC), that combines many frequently used functions in an MCU-based system, plus a Local Interconnect Network (LIN) transceiver. It has a 5.0V, 60mA low dropout regulator with ...
The MC33911 is a Serial Peripheral Interface (SPI)-controlled System Basis Chip (SBC) combining many frequently used functions in an MCU-based system, plus a Local Interconnect Network (LIN) transceiver. The MC33911 has a 5.0V - 60mA low dropout regulator ...
The MC33912 is a Serial Peripheral Interface (SPI) -controlled System Basis Chip (SBC), combining many frequently used functions in an MCU-based system, plus a Local Interconnect Network (LIN) transceiver. The MC33912 has a 5.0V - 60mA low dropout ...
The MC33989 is a monolithic integrated circuit combining many
functions used by microcontrollers (MCU) found in automotive
Engine Control Units (ECUs). The device incorporates
functions such as: two voltage regulators, four high voltage
(wake up) ...
Local Interconnect Network (LIN) is a serial communication
protocol designed to support automotive networks in conjunction with
Controller Area Network (CAN). As the lowest level of a hierarchical
network, LIN enables cost-effective communication with ...
Local Interconnect Network (LIN) is a serial communication protocol
designed to support automotive networks in conjunction with Controller
Area Network (CAN). As the lowest level of a hierarchical network, LIN
enables cost-effective communication with ...
The ATA6661 is a fully integrated LIN transceiver according to the LIN
specification 2.0. It interfaces the LIN protocol handler and the physical layer. The
device is designed to handle the low-speed data communication in vehicles, e.g., in
convenience ...
ATA6620N is a fully integrated LIN transceiver, designed according to the LIN specifi-
cation 2.0, with a low-drop voltage regulator (5V/50 mA). The combination of voltage
regulator and bus transceiver makes it possible to develop simple, but powerful, ...
The ATA6621N is a fully integrated LIN transceiver, complying with the LIN specifica-
tion, and with a low-drop voltage regulator for 5V/50 mA output and a window
watchdog adjustable via an external resistor. In this QFN20 package, the voltage reg-
ulator ...
ATA6602/ATA6603 is a single-package dual-chip circuit family for LIN-bus slave node
applications. It supports highly integrated solutions for in-vehicle LIN networks. The
LIN-system-basis-chip (LIN-SBC) consists of a LIN transceiver, voltage regulator ...
The ATA6662 is a fully integrated LIN transceiver complying with the LIN
specification 2.0 and SAEJ2602-2. It interfaces the LIN protocol handler and the phys-
ical layer. The device is designed to handle the low-speed data communication in
vehicles, for ...
The ATA6622 is a fully integrated LIN transceiver, which complies with the LIN 2.0
and SAEJ2602-2 specifications. It has a low-drop voltage regulator for 3.3V/50 mA
output and a window watchdog. The ATA6624 has the same functionality as the
ATA6622; ...
The ATA6622 is a fully integrated LIN transceiver, which complies with the LIN 2.0
and SAEJ2602-2 specifications. It has a low-drop voltage regulator for 3.3V/50 mA
output and a window watchdog. The ATA6624 has the same functionality as the
ATA6622; ...
ATA6623/ATA6625 is a fully integrated LIN transceiver, designed according to the LIN
specification 2.0, with a low-drop voltage regulator (3.3V/5V/50 mA). The combination
of voltage regulator and bus transceiver makes it possible to develop simple, but ...
ATA6612/ATA6613 is a System-in-Package (SiP) product, which is particularly suited
for complete LIN-bus slave-node applications. It supports highly integrated solutions
for in-vehicle LIN networks. The first chip is the LIN-system-basis-chip ...
ATA6612/ATA6613 is a System-in-Package (SiP) product, which is particularly suited
for complete LIN-bus slave-node applications. It supports highly integrated solutions
for in-vehicle LIN networks. The first chip is the LIN-system-basis-chip ...
The MAX
528
13020/MAX13021 60V fault-protected low-power local interconnect network (LIN) transceivers are ideal for use in automotive network applications where high reliability is required. The devices provide the interface between the LIN master/slave ...
The MAX13020/MAX13021 60V fault-protected low-power local interconnect network (LIN) transceivers are ideal for use in automotive network applications where high reliability is required. The devices provide the interface between the LIN master/slave protocol ...