LTC1682-3.3 - Doubler Charge Pumps With Low Noise Linear Regulator
The LTC1682 LTC1682-3.3 LTC1682-5 are doubler Charge Pumps with an internal low noise, low dropout (LDO) linear Regulator These parts are designed to provide a low noise boosted supply voltage for powering noise sensitive devices such as high frequency VCOs in Wireless applications. An internal doubler Charge Pump converts a 1.8V to 4.4V input to a boosted output, while the internal LDO Regulator converts the boosted voltage to a low noise regulated output. The adjustable version allows the user to set Vout via external resistors connected to FB. The Regulator is capable of supplying up to 50mA of output current. Shutdown reduces the supply current to <5A, removes the load from VIN by disabling the Regulator and discharges Vout t 83c o ground through a 100Ohms Switch The LTC1682 LDO Regulator is stable with only 2F on the output. Small ceramic capacitors CAN be used, reducing PC board area. The LTC1682 LTC1682-3.3 LTC1682-5 are short-circuit and over temperature protected. The parts are available in 8-pin MSOP and SO packages.
By Linear Technology Corporation
|SC33908LAER2||Freescale Semiconductor||System Basis Chip, CAN/LIN, 1.2 or 3.3V/1.5A VCORE buck, 3.3 or 5.0V/800mA VIO, QFP 48, Reel|
|LTC1682-3.3 Pb-Free||LTC1682-3.3 Cross Reference||LTC1682-3.3 Schematic||LTC1682-3.3 Distributor|
|LTC1682-3.3 Application Notes||LTC1682-3.3 RoHS||LTC1682-3.3 Circuits||LTC1682-3.3 footprint|