LTC1732-4.2 - Lithium-Ion Linear Battery Charger Controller

The LTC1732 is a complete constant-current/constant-voltage linear charge controller for lithium-ion (Li-Ion) batteries. Nickel-cadmium (NiCd) and nickel metal-hydride (NiMH) batteries CAN also be charged with constant current using external termination. Charge current CAN be programmed with 7% (max) accuracy using external sense and program resistors. An internal resistor divider and precision reference set the final float voltage with 1% accuracy. The SEL pin allows users to charge either 4.1V or 4.2V cells. When the input supply is removed, the LTC1732 automatically enters a low current sleep mode, dropping the battery drain current to 7A. An internal Comparator detects the end-of-charge (C/10) condition while a programmable Timer using an external capacitor, sets the total charge time. Fully discharged cells are automatically trickle charged at 10% of the programmed current until cell voltage exceeds 2.457V. The LTC1732 begins a new charge cycle when a discharged battery is connected to the charger or when the input power is applied. In addition, if the battery remains connected to the charger and the cell voltage drops below 3.8V for the LTC1732-4 or below 4.05V for the LTC1732-4.2 a new charge cycle will begin. The LTC1732 is available in the 10-pin MSOP package.
By Linear Technology Corporation
LTC1732-4.2 's PackagesLTC1732-4.2 's pdf datasheet



LTC1732-4.2 Pinout, Pinouts
LTC1732-4.2 pinout,Pin out
This is one package pinout of LTC1732-4.2,If you need more pinouts please download LTC1732-4.2's pdf datasheet.

LTC1732-4.2 Application circuits
LTC1732-4.2 circuits
This is one application circuit of LTC1732-4.2,If you need more circuits,please download LTC1732-4.2's pdf datasheet.


Related Electronics Part Number

Related Keywords:

LTC1732-4.2 Pb-Free LTC1732-4.2 Cross Reference LTC1732-4.2 Schematic LTC1732-4.2 Distributor
LTC1732-4.2 Application Notes LTC1732-4.2 RoHS LTC1732-4.2 Circuits LTC1732-4.2 footprint