LTC4300A-2 - Hot Swappable 2-Wire Bus Buffers
The LTC4300A series hot swappable 2-wire bus Buffers allow I/O card insertion into a live Backplane without corruption of the data and Clock busses. When the connection is made, the LTC4300A-1 LTC4300A-2 provide bidirectional buffering, keeping the Backplane and card capacitances isolated. Rise-time accelerator circuitry* allows the use of weaker DC pull-up currents while still meeting rise-time requirements. During insertion, the SDA and SCL lines are precharged to 1V to minimize bus disturbances.
The LTC4300A-1 incorporates a CMOS threshold digital ENABLE input pin, which forces the part into a low current mode when driven to ground and sets normal operation when driven to VCC. It also includes an open drain READY output pin, which indicates that the Backplane and card sides are connected together. The LTC4300A-2 replaces the ENABLE pin with a dedicated supply voltage pin, VCC2, for the card side, providing level shifting between 3.3V and 5V systems. Both the Backplane and card may be powered with supply voltages ranging from 2.7V to 5.5V, with no contraints on which supply voltage is higher. The LTC4300A-2 also replaces the READY pin with a digital CMOS input pin, ACC, which enables and disables the rise-time accelerator currents.
The LTC4300A is available in a small 8-pin MSOP package.
*U.S. Patent No. 6,650,174
By Linear Technology Corporation
|STELLARIS-3P-CODER-DPROBE430-DEVBD||Texas Instruments||Red Suite 2|
|TPS2421-2EVM-03||Texas Instruments||TPS2421-2 Hot Swap Controller Evaluation Module|
|SN28835FS||Texas Instruments||SN28835 1/2-Inch NTSC Timer|
|LM21212-2EVM||Texas Instruments||Evaluation Board for the LM21212-2|
|TMS3471C||Texas Instruments||TMS3471C 2/3-Inch NTSC Timer|
|TMS3471C-X||Texas Instruments||TMS3471C 2/3-Inch NTSC Timer|
|LTC4300A-2 Pb-Free||LTC4300A-2 Cross Reference||LTC4300A-2 Schematic||LTC4300A-2 Distributor|
|LTC4300A-2 Application Notes||LTC4300A-2 RoHS||LTC4300A-2 Circuits||LTC4300A-2 footprint|