LTC4403-2 - Multiband RF Power Controllers For EDGE/TDMA

The LTC4403-2 is a multiband RF Power controller for RF Power Amplifiers operating in the 300MHz to 2.4GHz range. The LTC4403-2 has two outputs to control dual TX PA modules with two control inputs. An internal Sample and Hold circuit enables the LTC4403-2 to be used with AM modulation via the Carrier or PA supply. The input voltage range is optimized for operation from a single lithium-ion cell or 3x NiMH.
RF power is controlled by driving the RF Amplifier power control pins and sensing the resultant RF output power. The RF sense voltage is peak detected using an on-chip Schottky Diode This detected voltage is compared to the DAC voltage at the PCTL pin to control the output power.
The LTC4403-1 is a single output RF Power controller with identical performance to the LTC4403-2. The LTC4403-1 has one output to control a single TX PA or dual TX PA module with a single control input and is available in an 8-pin MSOP package.
Internal and external offsets are cancelled over temperature by an autozero control loop. The shutdown feature disables the part and reduces the supply current to <10A.
By Linear Technology Corporation
LTC4403-2 's PackagesLTC4403-2 's pdf datasheet



LTC4403-2 Pinout, Pinouts
LTC4403-2 pinout,Pin out
This is one package pinout of LTC4403-2,If you need more pinouts please download LTC4403-2's pdf datasheet.

LTC4403-2 Application circuits
LTC4403-2 circuits
This is one application circuit of LTC4403-2,If you need more circuits,please download LTC4403-2's pdf datasheet.


Related Electronics Part Number

Related Keywords:

LTC4403-2 Pb-Free LTC4403-2 Cross Reference LTC4403-2 Schematic LTC4403-2 Distributor
LTC4403-2 Application Notes LTC4403-2 RoHS LTC4403-2 Circuits LTC4403-2 footprint