3-Amp Adjustable Regulator

The LM150 series of adjustable 3-terminal positive voltage Regulators is capable of supplying in excess of 3A over a 1.2V to 33V output range. They are exceptionally easy to use and require only 2 external resistors to set the output voltage. Further, both line and load regulation are comparable to Discrete designs. Also, the LM150 is packaged in standard Transistor packages which are easily mounted and handled.
In addition to higher performance than fixed Regulators the LM150 series offers full overload protection available only in IC's. Included on the chip are current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is accidentally disconnected.
Normally, no capacitors are needed unless the device is situated more than 6 inches from the input Filter capacitors in which case an input bypass is needed. An output capacitor CAN be added to improve transient response, while bypassing the adjustment pin will increase the regulator's ripple rejection.
Besides replacing fixed Regulators or Discrete designs, the LM150 is useful in a wide variety of other applications. Since the Regulator is "floating" and sees only the input-to-output differential voltage, supplies of several hundred volts CAN be regulated as long as the maximum input to output differential is not exceeded, i.e., avoid short-circuiting the output.
By connecting a fixed resistor between the adjustment pin and output, the LM150 CAN be used as a precision current Regulator Supplies with electronic shutdown CAN be achieved by clamping the adjustment terminal to ground which programs the output to 1.2V where most loads draw little current.
The part numbers in the LM150 series which have a K suffix are packaged in a standard Steel TO-3 package, while those with a T suffix are packaged in a TO-220 plastic package. The LM150 is rated for -55?C < TJ < +150?C, while the LM350A is rated for -40?C < TJ < +125?C, and the LM350 is rated for 0?C < TJ < +125?C.
By National Semiconductor Corporation
Part Manufacturer Description Datasheet Samples
LM3502SQ-44 Texas Instruments LED DISPLAY DRIVER, QCC16, LLP-16
LM3502SQX-16/NOPB Texas Instruments Step-Up Converter for White LED Applications 16-WQFN -40 to 125
LM3502SQX-35/NOPB Texas Instruments Step-Up Converter for White LED Applications 16-WQFN -40 to 125
LM350K STEEL Texas Instruments 3A Adjustable Output Linear Regulator / LDO 2-TO-3 0 to 0
LM3502SQ-35/NOPB Texas Instruments Step-Up Converter for White LED Applications 16-WQFN -40 to 125
LM3509SDX/NOPB Texas Instruments High Efficiency Boost for White LED''s and/or OLED Displays with Dual Current Sinks 10-WSON -40 to 85
LM3502ITL-25/NOPB Texas Instruments Step-Up Converter for White LED Applications 10-DSBGA -40 to 125
LM3503SQ-44 Texas Instruments LED DISPLAY DRIVER, PQCC16, TLLP-16
LM3508TL/NOPB Texas Instruments Synchronous Magnetic Constant Current White LED Driver 9-DSBGA -30 to 85
LM3503ITLX-25/NOPB Texas Instruments Dual-Display Constant Current LED Driver with Analog Brightness Control 10-DSBGA -40 to 85
LM350 's PackagesLM350 's pdf datasheet
LM350AT TO-220
LM350T TO-220

LM350 Pinout, Pinouts
LM350 pinout,Pin out
This is one package pinout of LM350,If you need more pinouts please download LM350's pdf datasheet.

LM350 Application circuits
LM350 circuits
This is one application circuit of LM350,If you need more circuits,please download LM350's pdf datasheet.

Related Electronics Part Number

Related Keywords:

LM350 Pb-Free LM350 Cross Reference LM350 Schematic LM350 Distributor
LM350 Application Notes LM350 RoHS LM350 Circuits LM350 footprint