Series White LED Driver

The LM3590 is a White LED constant current driver capable of supplying up to 3 White LEDs connected in series with 20mA. This device operates over a wide 6V-12.6V input voltage range. The output CAN accomodate LEDs with a combined forward voltage of up to 11.5V, from a 12V input supply. The LED drive current is programmed by using an external resistor on the ISET pin.
LED brightness CAN be linearly varied up to the programmed LED current by applying a Pulse Width Modulated (PWM) signal to the EN pin of the device. The LED output current of the LM3590 is tightly controlled over temperature and voltage. LED Current matching is guaranteed due to the series configuration of the LEDs The series topology also simplifies the connection between the White LEDs in the Display module and the LM3590 since only one connection is required.
The LM3590 typically draws only 50?A when operating in the no-load condition and draws less than 0.1?A when the device is shut down.
The LM3590 is available in a small 5-pin SOT23 package.
By National Semiconductor Corporation
LM3590 's PackagesLM3590 's pdf datasheet
LM3590MFEV
LM3590MF SOT-23
LM3590MFX SOT-23




LM3590 Pinout, Pinouts
LM3590 pinout,Pin out
This is one package pinout of LM3590,If you need more pinouts please download LM3590's pdf datasheet.

LM3590 Application circuits
LM3590 circuits
This is one application circuit of LM3590,If you need more circuits,please download LM3590's pdf datasheet.


Related Electronics Part Number

Related Keywords:

LM3590 Pb-Free LM3590 Cross Reference LM3590 Schematic LM3590 Distributor
LM3590 Application Notes LM3590 RoHS LM3590 Circuits LM3590 footprint