Adjustable Micropower Voltage Reference
The LM185 LM285 LM385 are micropower 3-terminal adjustable band-gap Voltage Reference Diodes Operating from 1.24 to 5.3V and over a 10?A to 20mA current range, they feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming is used to provide tight voltage tolerance. Since the LM185 band-gap reference uses only Transistors and resistors, low noise and good long-term stability result.
Careful design of the LM185 has made the device tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation.
The extremely low power drain of the LM185 makes it useful for micropower circuitry. This Voltage Reference CAN be used to make portable meters, Regulators or general purpose Analog circuitry with battery life approaching shelf life. Further, the wide operating current allows it to replace older references with a tighter tolerance part.
The LM185 is rated for operation over a -55C to 125C temperature range, while the LM285 is rated -40C to 85C and the LM385 0C to 70C. The LM185 is available in a hermetic TO-46 package and a leadless chip Carrier package, while the LM285 LM385 are available in a low-cost TO-92 molded package, as well as S.O.
By National Semiconductor Corporation
|LM385-ADJ Pb-Free||LM385-ADJ Cross Reference||LM385-ADJ Schematic||LM385-ADJ Distributor|
|LM385-ADJ Application Notes||LM385-ADJ RoHS||LM385-ADJ Circuits||LM385-ADJ footprint|