LT1016 - Ultra Fast Precision 10ns Comparator
The LT1016 is an UltraFast 10ns Comparator that Interfaces directly to TTL/CMOS Logic while operating off either 5V or single 5V supplies. Tight offset voltage specifications and high gain allow the LT1016 to be used in precision applications. Matched complementary outputs further extend the versatility of this Comparator
A unique output stage provides active drive in both directions for maximum speed into TTL/CMOS Logic or passive loads, yet does not exhibit the large current spikes found in conventional output stages. This allows the LT1016 to remain stable with the outputs in the active region which, greatly reduces the problem of output glitching when the input signal is slow moving or is low level.
The LT1016 has a LATCH pin which will retain input data at the outputs, when held high. Quiescent negative power supply current is only 3mA. This allows the negative supply pin to be driven from virtually any supply voltage with a simple resistive divider. Device performance is not affected by variations in negative supply voltage.
Linear Technology offers a wide range of Comparators in addition to the LT1016 that address different applications. See the Related Parts section on the back page of the data sheet.
By Linear Technology Corporation
|LT1016 Pb-Free||LT1016 Cross Reference||LT1016 Schematic||LT1016 Distributor|
|LT1016 Application Notes||LT1016 RoHS||LT1016 Circuits||LT1016 footprint|