LT1022 - High Speed, Precision JFET Input Operational Amplifier

The LT1022 JFET input Operational Amplifier combines high speed and precision performance.
A 26V/s slew rate and 8.5MHz gain-bandwidth product are simultaneously achieved with offset voltage of typically 80V, 1.5V/C drift, bias currents of 50pA at 70C, 500pA at 125C. The output delivers 20mA of load current without gain degradation.
The 250V maximum offset voltage specification represents less than 1/2 least significant bit error in a 14-bit, 10V system.
The LT1022A meets or exceeds all OP-16A and OP-16E specifications. It is faster and more accurate without stability problems at cold temperatures.
The LT1022 CAN be used as the output Amplifier for 12-bit current output D/A Converters as shown below.
For a more accurate, lower power dissipation, but slower JFET input op amp please refer to the LT1055 data sheet.
By Linear Technology Corporation
LT1022 's PackagesLT1022 's pdf datasheet
LT1022CN8 PDIP
LT1022CN8-PBF PDIP

LT1022 pdf datasheet download


LT1022 Pinout, Pinouts
LT1022 pinout,Pin out
This is one package pinout of LT1022,If you need more pinouts please download LT1022's pdf datasheet.

LT1022 Application circuits
LT1022 circuits
This is one application circuit of LT1022,If you need more circuits,please download LT1022's pdf datasheet.


Related Electronics Part Number

Related Keywords:

LT1022 Pb-Free LT1022 Cross Reference LT1022 Schematic LT1022 Distributor
LT1022 Application Notes LT1022 RoHS LT1022 Circuits LT1022 footprint