LT1490A - Dual/Quad Over-The-Top Micropower Rail-to-Rail Input And Output Op Amps

The LT1490A LT1491A are dual and quad op amps with a low input offset voltage of 500V max. The LT1490A LT1491A operate on all single and split supplies with a total voltage of 2V to 44V, drawing only 40A of quiescent current per Amplifier These Amplifiers are reverse supply protected; they draw virtually no current for reverse supply up to 18V. The input range of the LT1490A LT1491A includes both supplies and the output swings to both supplies. Unlike most micropower op amps the LT1490A LT1491A CAN drive heavy loads; their Rail-to-Rail outputs drive 20mA. The LT1490A LT1491A are unity-gain stable and drive all capacitive loads up to 10,000pF when optional 0.22F and 150& compensation is used.
The LT1490A LT1491A have a unique input stage that operates and remains high impedance when above the positive sup 4fb ply. The inputs take 44V both differential and common mode even when operating on a 3V supply. Built-in resistors protect the inputs for faults below the negative supply up to 15V. There is no phase reversal of the output for inputs 15V below V or 44V above V, independent of V+.
The LT1490A dual op amp is available in the 8-pin MSOP, PDIP and SO packages. For space limited applications LT1490A is available in a 3mm 3mm 0.8mm, dual fine pitch leadless package (DFN). The quad LT1491A is available in the 14-pin SO, PDIP and 5mm 3mm 0.8mm DFN packages.
By Linear Technology Corporation