LT6600-10 - Very Low Noise, Differential Amplifier And 10MHz Lowpass Filter
The LT6600-10 combines a fully Differential Amplifier with a 4th order 10MHz lowpass Filter approximating a Chebyshev frequency response. Most Differential Amplifiers require many precision external components to tailor gain and bandwidth. In contrast, with the LT6600-10 two external resistors program differential gain, and the Filters 10MHz cutoff frequency and passband ripple are internally set. The LT6600-10 also provides the necessary level shifting to set its output common mode voltage to accommodate the reference voltage requirements of A/Ds.
Using a proprietary internal architecture, the LT6600-10 integrates an antialiasing Filter and a Differential Amplifier driver without compromising distortion or low noise performance. At unity gain the measured in band signal-to-noise ratio is an impressive 82dB. At higher gains the input referred noise 54c decreases so the part CAN process smaller input differential signals without significantly degrading the output signal-to-noise ratio.
The LT6600-10 also features low voltage operation. The differential design provides outstanding performance for a 2VP-P signal level while the part operates with a single 3V supply.
For similar devices with other cutoff frequencies, refer to the LT6600-20 LT6600-15 LT6600-5 and LT6600-2.5.p>
By Linear Technology Corporation
|LT6600-10 Pb-Free||LT6600-10 Cross Reference||LT6600-10 Schematic||LT6600-10 Distributor|
|LT6600-10 Application Notes||LT6600-10 RoHS||LT6600-10 Circuits||LT6600-10 footprint|