LTC3230 - 5-LED Main/Sub Display Driver With Dual LDO

The LTC3230 is a low noise Charge Pump DC/DC converter designed to drive 4 Main LEDs and 1 Sub LED plus two 200mA linear Regulators to provide additional system power. The LTC3230 Charge Pump requires only four small ceramic capacitors and one current set resistor to form a complete LED power supply and current controller. Built-in soft-start circuitry prevents excessive inrush cur- rent during start-up and mode changes. High switching frequency enables the use of small external capacitors. Main and Sub full-scale current settings are programmed by a single external resistor. Charge Pump efficiency is optimized based on the voltage across the LED current sources. The part powers up in 1x mode and automatically switches to the next higher mode, 1.5x and subsequently 2x, whenever any LED current source approaches dropout. Two 200mA linear Regulators have independent enable and output voltage select pins. Each Regulator CAN be set to one of three pre-selected output voltages with tri-level input pins. The Regulators may be enabled independently of the Charge Pump The LTC3230 is available in a low profile (0.75mm) 3mm x 3mm 20-lead QFN package.
By Linear Technology Corporation
LTC3230 's PackagesLTC3230 's pdf datasheet

LTC3230 Pinout, Pinouts
LTC3230 pinout,Pin out
This is one package pinout of LTC3230,If you need more pinouts please download LTC3230's pdf datasheet.

LTC3230 Application circuits
LTC3230 circuits
This is one application circuit of LTC3230,If you need more circuits,please download LTC3230's pdf datasheet.

Related Electronics Part Number

Related Keywords:

LTC3230 Pb-Free LTC3230 Cross Reference LTC3230 Schematic LTC3230 Distributor
LTC3230 Application Notes LTC3230 RoHS LTC3230 Circuits LTC3230 footprint